Age Verification
This website contains age-restricted material including nudity and explicit content. By entering, you confirm being at least 18 years old or the age of majority in the jurisdiction you are accessing the website from.
I am 18+ or older - Enter
I am under 18 - Exit
Our parental controls page explains how you can easily block access to this site.

Durars mensajes

  Fórum

Wyldanimal
MODERADOR
De em Mar 2008
16962 post(s)

Discussions for Scenes for Version 1.2.X Fullscreen Mode here

Tudo sobre iStripper
Faz 3 days, 5029 respostas
Enough of them usually crashes the iStripper Player.

the RandomShadres.exe has no impact on the iStripper player.
( it interfaces with the PC's Keyboard buffer, and pushes a Key stroke to the Buffer.
Specifically the Down Arrow Key )
Just prior to pushing the Down Arrow on to the Keyboard Buffer, it tells the OS, give the focus to the Process with the Process ID of 'nnnnn'
Since the OS then hands the focus to iStripper, it is the App that gets the next Keyboard key strokes.

The iStripper app then sees the Down arrow having been pressed on the Keyboard.

No Direct connection between the RandomShadrers App and iStripper.



iStripper crashes are not related to the RandomShaders app.

I have noticed many crashes while using fullScreen without the randomshaders use.
especially scenes using shaders.
I have also noticed many times, white Boxes where the models should be, prior to crashes on Scenes that aren't using shaders.
This sometimes happens, where there is a Long Delay, before the Scene starts. ( probably a Memory Leak )
Monitoring Memory, I do see there may be a GPU memory leak, but I can't repetitively cause it to happen and I've only been monitoring it once or twice that I saw it happen.

But Nothing that I can ***** to happen so I can't write a report with Steps to make it happen.

Here is one example that I captured while monitoring after a crash and restart.
iStripper was idle no models playing, but the Memory was climbing, got to over 7GB of Memory.
While at the same time my Internet was Maxed out by iStripper, but wasn't able to discover what was being downloaded.
I'm not able to replicate this consistently.
https://virtuastripper.net/video/iStripper-Idle-Memory-leak-001.mp4


This error: Process 'nnnn' was not found
is Because the iStripper app is No longer found.
It is either Not responding, or it has crashed
The OS tells the RandomShader app, the Process ID you told me to give the focus too, doesn't exist.
and the RandomShaders app reports the error.
Wyldanimal
MODERADOR
De em Mar 2008
16962 post(s)

Share your FullScreen - Member Created Scenes here

Tudo sobre iStripper
Faz 3 days, 2672 respostas
Modified Titiii Desk Scenes

in this thread a member asked for help converting the titiii desk scene from it's origional format, to work on a 4K screen
https://www.istripper.com/forum/thread/56928/1?post=798161

here is the original scene:
when viewed on a 1080p 16:9 format screen, there is a large black bar to the right side.

clip {
id: Clip
allow : fronttable
}

clip {
id: screen_clip
}

texture {
id: background
source: desk.jpg
}

texture {
id: screen
source: screen_mask.png
}

texture {
id: chair
source: chair.png
}

//------------------------------//

camera {
type: 2D
pos: -10, -5
size: 800, 450


sprite {
pos: 340, 265
size: 780, 520
source: background
}

clipSprite {
pos: 373, 233
standingHeight: 56
source: screen_clip
}

sprite {
pos: 340, 265
size: 780, 520
source: screen
}

clipSprite {
pos: 410, 300
standingHeight: 420
source: Clip
color: 0.85, 0.85, 0.75
material: true
}

sprite {
pos: 340, 230
size: 780, 520
source: chair
}

light {
//pos: 0, -850, 100
ambient: 0.75, 0.75, 0.85
}
}


When I looked at the Original images, these already were in 1080p size 1920 x 1080
no changes to the images were made.
Here are my modifications to eliminate the black Bar, and keep the 16:9 size ratio


clip {
id: Clip
allow : fronttable
}

clip {
id: screen_clip
}

texture {
id: background
source: desk.jpg
}

texture {
id: screen
source: screen_mask.png
}

texture {
id: chair
source: chair.png
}

//------------------------------//

camera {
type: 2D
pos: 0, 0
size: 800, 534


sprite {
pos: 400, 265
size: 800, 534
source: background
}

clipSprite {
pos: 433, 233
standingHeight: 56
scale: 0.84, 1.0
source: screen_clip
}

sprite {
pos: 400, 265
size: 800, 534
source: screen
}

clipSprite {
pos: 470, 300
standingHeight: 420
source: Clip
color: 0.85, 0.85, 0.75
scale: 0.84, 1.0 // corection for camera width proportion
material: true
}

sprite {
pos: 400, 200
size: 800, 700
source: chair
}

light {
//pos: 0, -850, 100
ambient: 0.75, 0.75, 0.85
}
}



you can download the Modified titiii Desk Scenes here:
https://virtuastripper.net/@titiii_desk4K.7z
EverthangForever
De em Oct 2009
4446 post(s)

Discussions for Scenes for Version 1.2.X Fullscreen Mode here

Tudo sobre iStripper
Faz 4 days, 5029 respostas
Endless Shaders Project
Easter is a good time to revisit and update the Endless Shaders Project.
https://www.istripper.com/forum/thread/29408/80?post=768906

Install Random Shader.exe.
I have added 14 more (C)RandomShader scenes which should allow a large number of shaders
to act upon other shaders to create suprising new scenes using @WA 's Random Shader.exe

If you are unsure of your correct fullscreen paths settings click the folder icon top left on your fullscreen gallery page.
If you already have Random Shader.exe in your shaders folder, use that instead.

https://scenes.virtuastripper.net/ET_ShadersOnShaders2.zip

Above is the zip for the new random shader scenes including the app.
extract it to your .scenes/ET Scenes/Shaders folder
There should be only one working copy of Random Shader.exe per folder.

Open your Random Shaders.exe, and edit the settings as follows:

In the iStripper player, you can go to your fullscreen gallery page
Click on the folder symbol on the top left of the page to show where your shaders folder is.
Clue: : 'Shaders' is a subfolder of ET Scenes
Copy this folder location and edit the config.of Random Shader.exe for both folder settings
where it shows ..data/scenes/..Make it so your paths end like..
../data/scenes/ET Scenes/shaders

Tick these checkboxes :
Use Current Paths
Use Subfolders
Save both Paths

If you have marked the (C)Random Shader scenes active in iStripper Player
you can run Random Shader.exe whenever you want iStripper to provide a new show.
If you tick push scene change you need to allow approx 32 seconds time for two interacting
shaders to compile & load..

Pics:
https://scenes.virtuastripper.net/SceneImages/RandomMix_1.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_2.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_3.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_4.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_5.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_6.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_7.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_8.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_9.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_10.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_11.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_12.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_13.jpg
https://scenes.virtuastripper.net/SceneImages/RandomMix_14.jpg
Wyldanimal
MODERADOR
De em Mar 2008
16962 post(s)

Share your FullScreen - Member Created Scenes here

Tudo sobre iStripper
Faz 4 days, 2672 respostas
I also Have a set of 3D SBS Random Shader Scenes, that uses my Random Shader App.
I'm making my final edits to it, so I will probably Post it After the Easter holiday.
Edit: I think this is good to go now...


Here are the Instructions:

//Scene inspiration from @EverthangForever
//Before Starting the Scene
//Browse to the WA-ET-3D\Shaders\Random3D\ Folder
//Run the RandomShaders.exe app
//Then minimize it to the taskbar
//
//WyldAnimal
//
//That will run the randomizer, so that each time you play the Scene
//It will use one of the 16 shaders at random.
//
// The Randomizer Starts up in Random mode, changing the random Shader every 15 seconds.
// A shader is selected at Random and stored for the Next Scene change.
//
//More Shaders?
// Download the Extra Shaders Pack. After you Install the Extra Shaders.
//If you place a check in the use Subfolders box
//There will be 1500 or more additional Random Shaders used.
//
//
//Advanced use:
//Click Pause
//Set the time to 30 or 60 seconds
//Put a check in Push Scene Change
//Click Continue
//Now the Scene will be changed Automatically with a different Shader
//when the time counts down.
//
//
Manual use:
// Click Pause
// When Paused, the Manual Shader contrls show up at the bottom
// in Random mode, there is only a next button
// click it to use the Next Random Shader
// when Random is not checked, it is in sequential mode
// now there is a Next and Previous button
// the buttons also work combined with the Push Scene Change check box
// if this box is checked, then the Manual Shader buttons will aslo
// push the Scene to change
// if the Push Scene Change box is Not checked
// then only the random Shader is loaded into memory, the Scene is Not changed,
// but on the Next Scene change, the New Random Shader will be used.
//
// The Go to box:
// while Paused this box is enabled
// if you know the shader number, you can enter it in the box and press enter
// to jump directly to that shader.
// Shaders are numbered from 0 to 1 less than the total shown in the total box.


The Scenes are 4K Side by Side 3D
But I also have a different set of Lower Resolution 1080p SBS scenes.

Files:
Read-Me-1st.txt <-- The Instructions
WA-ET-lr-Random-3D-A.scn <-- Low Resolution copy A
WA-ET-lr-Random-3D-B.scn <-- Low Resolution copy B

WA-ET-Random-3D-A.scn <-- High Resolution copy A
WA-ET-Random-3D-B.scn <-- High Resolution copy B

Best Viewed in a VR headset, such as the Quest 2 or Quest 3
( I use a Paid App called Virtual Desktop, and then View the Desktop using 1/2 SBS mode )

Can also Be Viewed on a 3D TV that has SBS 3D conversion.
Can be Viewed on a 3D Projector with 3D shutter Glasses.

So users Might be able to Use Cross Eyed viewing on their PC screen.
But that will not give good results.



Download:
https://virtuastripper.net/@WA-ET-3D.zip
https://virtuastripper.net/SceneImages/@WA-ET-3D.jpg

Some of the Shaders Interact with the Background Image.
I have a few Default Backgrounds, but here is an Add On Background Pack to use.
https://virtuastripper.net/@WA-ET-3D-Extra-Backgrounds.zip

If you Want the Add on Shaders here is the Extra Shaders Pack
( I want to Thank @EverthangForever for giving me permission to share these. )
https://virtuastripper.net/@WA-ET-3D-Extra-Shaders.zip

Demo Videos:
https://virtuastripper.net/video/Random3D-Shaders-how-to-001.mp4
https://virtuastripper.net/video/Random3D-Extra-Shaders-002.mp4
https://virtuastripper.net/video/Random3D-push-scene-change-003.mp4

These are from a Prior Version, but use a Windowed Scene for the Demo.
https://virtuastripper.net/video/How-to-play-The-Random-3D-Scenes-001.mp4
https://virtuastripper.net/video/Random-3D-Shader-Advance-use-002.mp4