The simple answer is yes.

Use the name and password for the account from ten years ago and you will see the account. The problem is that you have to remember the account details. ( I forgot my account details and lost a few cards from the wayback time.)

The other point to remember is that sometimes, a model requests her cards to be removed. If you "have" a card and can't access it for this reason, then contact support and they can work with you.

is there a person that actually has them all? :D I am curious

If you search this forum for "hall of fame" you will see the people who have full, or near full, collections.

Hello,

are the shows I bought over 10 years ago still available for my account?

Monika May - I May Clean That - f1937 - iStripper XXX
Amber Slassh - Hotpants Special - f1927 - iStripper XXX
Abby Margarita - It's Bedtime - f1896 - iStripper XXX
Vixi Rafi - A Little Behind - f1942 - iStripper XXX
Era Queen - Attraction - e2104 - iStripper
Sara Diamante - Fit Fantasy - f1939 - iStripper XXX
Adriana Sweetblonde - Hard Net - f1910 - iStripper XXX

If you download the cards in the highest resolution for each one, your Models folder will be filled by almost 8TB of datas.

Like missed buses, trains and planes, there will most likely be another similar offer somewhere down the line.

I hope so, I cannot keep spending so much money on the events hoping to win a joker. There are several SECs I want badly and I'm starting to give up hope.

we should have one topic named "great limited offers bilboard", run by users :)
Forum is so large to check everything, this way, I know one thread that I check once per week, as a must, and the rest when I feel like it :)

Check out this post:
https://www.istripper.com/forum/thread/40970/1?post=694432

is there a list of all models that used to be available, but are not anymore, for whatever reason?

And is there a person that actually has them all? :D I am curious

If one was to won literary all cards that are now avaiable - how much space on HDD would it take?

Done, thanks.

@Cailloubel
Ouvre les réglages du logiciel et vérifie que tous les niveaux d'érotismes sont sélectionnés, ainsi que toutes les collections.
En haut à gauche de la page des réglages, active la case Réglages avancés et au niveau du rendu graphique, change de GPU vers CPU (ou inversement).

Je n’arrive pas à lire les shows achetés dans ma collection. Je vois le téléchargement arriver à 100%, j’appuie sur Start… mais rien ne se passe ! Merci

💕

Thank God It's Friday and I'm happy to be back with you all and to have all these great shows of the week to download and enjoy, made of my favorite angel faces !

• Kaly feels so sexy playing a "Macao's Girl"! This outfit is AMAZING !
• Georgia is a real delight and she "Maid This For You"
• "Lasso Me" says Avery and we can only grant her request !!!
• what a lovely pink bodysuit ! Reina Ohara's breast is sooo attractive in "Bubblegum Wrap"
• Talking about light pink, here is Ashby Winter in "Sweet Ashby"; she has a little something of Marilyn that drives me crazy!
• It's not a surprise that Ave Deva is among our top sellers for July !! Discover without delay this incredibly sexy dress in "La Dominatrice"
• Wikki has a story of countryside to tell you today in "Conter Fleurette"...

In VR 180 :

Enjoy the exceptional performance of Reina Ohara :
https://www.istripper.com/vr180/detail/6502c51f45e6c590


PLEASURE CHEST and FREE PACKS

Last week to enjoy the Pleasure Chest and Free Packs ! And 2 weeks left to reach the Special Event Card of Lia Lin "Ocean Blue" !

Try your luck with the pleasure chest!
You can win up to 200 credits if you align 3 identical symbols on a line.
Cumulate keys, open chests and win 20, 200, 1000 credits or a gift card, a joker card or a special event card.

The Free Pack game makes you buy packs of shows with discounts getting higher and higher AND Free packs of an increasing number of cards scattered along your path of progression !
What better way to increase your collection, reach your next VIP level for even bigger permanent discounts and obtain the Special Event Card of Lia Lin!!!

She's a beautiful dream.

Please DM me the details you gave when registering

I have the same issue. I'm pretty sure I never received my credits from about a month ago.

I wasn't really sure where to put this, but a week ago I registered for Hentai Heroes to get the advertised 25 credits upon registration. Well, I registered and played for a while but have not seen the promised credits. When can I be expecting them?

😍😍😍

Amazing ! Polly Yangs is our TOP SELLER of July, slightly above Emiri Momota!

This sublime blond angel is indeed a pure delight and you have all understood it!

This is all the more significant as it is her fourth card to achieve this success, proof -if any were needed- that Polly is a real gem! Each performance is exceptional and deserves to be collected!



And the ones of you you succeeded in getting her EX card "I nee a Splash" can only be pleased about it!



Of course, she is followed very closely by your queen, Emiri Momota and her adorable cosplay which made your heads spin and captivated your hearts!





And I'm super happy to see that you fell like me for the exceptional performance of Ave Deva, so aphrodisiac as a sexy gamer!



Needless to say, I strongly encourage you to come and discover her other cards; such a promising model!

Here is one of the revelations of the year !!!
Miss Reina Ohara, in an AMAZING cosplay !

Enjoy !

https://www.istripper.com/vr180/detail/6502c51f45e6c590

@cobrasu,

Click on the Queue button. Click on the 3 dots and select the frequency to 6 shows. Then click on the button disable/enable previews to toggle it between enable and disable.

Make sure the button says 'enable previews'. If it says 'disable previews', then the previews are still enabled.

How to disable free preview frequency?Why not add a disable item?

@BJlover Thanks. You too have avery nice day!!! 😊

Issue fixed. Thread closed.

Use your Phones Mobile web Browser
https://www.istripper.com/models
then set you browser option to display Desktop site.

@Wyldanimal

Thanks!

@whateverr1000

Thank again!

Have a very nice day!!!

😊

@BJlover f1947 Shoes stay on in 7 clips (4 pole and 3 standing clips). Shoes come off but stockings stay on in 2 clips (1 Standing and 1 table). Start with no shoes but stockings stay on in 1 table clip. And in only 1 table clip she starts with no shoes and she takes stockings off.

Setting: Minimum Delay between Scenes

This is counter of total clip play time. When the total clip play time Has exceeded the set value
then the Next clip will trigger a Scene Change
So both the Clip and the Scene will start together.
The Timer will be reset and start over.

https://www.istripper.com/customdata/forum/2025-08-19/WTa9qHbs.png


The Minimum set by the GUI slider is 5 minutes or 300,000 milliseconds

But you can set a lower value if you quit iStripper, and make a registry edit
Branch:

Computer\HKEY_CURRENT_USER\Software\Totem\vghd\parameters

key:

MinimumSceneDuration

Put a check in Decimal

https://www.istripper.com/customdata/forum/2025-08-19/O4yKHV7b.jpg


Then set the Time in Milliseconds 1000 = 1 second
60,000 = 1 minute
https://www.istripper.com/customdata/forum/2025-08-19/RKfUui4H.png

20,000 = 20 seconds
https://www.istripper.com/customdata/forum/2025-08-19/c03D1RMR.png

Restart iStripper,

Now the Scene will change after the end of a clip that lasted longer than your New Time you set.

If you touch the slider in Settings, It will reset the Value Back to a minimum of 300,000 = 5 Minutes.



Paramètre : délai minimum entre les scènes

Il s'agit du compteur de la durée totale de lecture des clips. Lorsque la durée totale de lecture des clips dépasse la valeur définie,
le clip suivant déclenche un changement de scène.
Le clip et la scène démarrent donc simultanément.
Le minuteur est réinitialisé et recommence à zéro.

https://www.istripper.com/customdata/forum/2025-08-19/WTa9qHbs.png


La valeur minimale définie par le curseur de l'interface graphique est de 5 minutes ou 300 000 millisecondes.

Mais vous pouvez définir une valeur inférieure si vous quittez iStripper et modifiez le registre.
Branche :

Computer\HKEY_CURRENT_USER\Software\Totem\vghd\parameters

Clé :

MinimumSceneDuration

Cochez la case Décimal.

https://www.istripper.com/customdata/forum/2025-08-19/O4yKHV7b.jpg

Définissez ensuite la durée en millisecondes. 1000 = 1 seconde
60 000 = 1 minute
https://www.istripper.com/customdata/forum/2025-08-19/RKfUui4H.png

20 000 = 20 secondes
https://www.istripper.com/customdata/forum/2025-08-19/c03D1RMR.png


Redémarrez iStripper.

Désormais, la scène changera à la fin d'un clip dont la durée est supérieure à la nouvelle durée que vous avez définie.

Si vous touchez le curseur dans les paramètres, la valeur sera réinitialisée à un minimum de 300 000 = 5 minutes.

Traduit avec DeepL.com (version gratuite)

*bump*

@BJlover Thanks. You too have a great time. 😊
f1923: Shoes stay on in 4 clips (1 standing 3 pole clips). Shoes come off in 3 clips (1 standing, 1 pole and 1 table clip). And she starts with no shoes in 6 clips (3 standing 1 pole and 2 table clips). All 3 table clips are SE.

@JoKerMen

From the User Manual in the "Help Centre"

Can I install on several computers ?
Yes. We grant you a licence for two computers.

Once you have installed iStripper on one computer and created your account, install the software on the second computer and register using the same login and password.

If it happens that you need to install again, make sure you uninstall one licence first (without uninstalling your collection).

If you encounter a message too many installations please contact the customer service.

HTH

I can see in the graphical interface that the cursor changes beyond 60%You're quite right - that probably got changed in the GUI and I never noticed because I don't use desktop mode.

This was also the case in version 1.0. You just have to avoid going below 60%, otherwise it will display a maximum of 60% again in small mode, and you will have to redo the changes in the registry.

I always have two girls playing in small mode at 82% size.

That's why I didn't understand why this change wasn't also made in the program's graphical interface for the minimum delay between scenes.

C'était ainsi aussi sur la version 1.0. Il faut juste éviter de passer sous la barre des 60%, sinon, elle affiche à nouveau un maximum de 60% en mode petit, et on doit refaire les changements dans la base de registre.

Je fait toujours jouer 2 filles en mode petit à la dimension de 82%.

C'était pourquoi je ne comprenais pas pourquoi ce changement ne s'effectuait pas aussi dans l'interface graphique du programme pour le délai minimum entre les scènes.

I can see in the graphical interface that the cursor changes beyond 60%

You're quite right - that probably got changed in the GUI and I never noticed because I don't use desktop mode.

On how many devices (PC/laptop) can iStripper be used with the same account? Since I can only watch on one device, simultaneous use wouldn't be possible. I can't find any information about this anywhere. After reinstalling or changing devices, my account has been "locked" twice in five years, meaning it wasn't possible to reactivate it until after reactivation.

How can we save the configuration of the number of seconds and the selection of subfolders in the RandomShaders.exe program, so that we don't have to reconfigure them each time we open the program? I clicked on “Save Paths”, but this has no impact on the backup of this data.

Well I thought so too. Multiple settings in a drop down window or somesuch 😪

Eh bien je le pensais aussi. Plusieurs paramètres dans une fenêtre déroulante ou quelque chose

@CountDraculaOut of curiosity, I made the change in the registry as indicated by writing “3e8”. I restarted the program. I checked the software settings.What is shown on screen is set by the GUI - it doesn't have a setting lower than 5 minutes so it can't show you what you set in the registry. If you move the slider it will write the new level into the registry but if you don't touch it, it should operate with the value you gave it.It's the same method as where people have edited to allow desktop multi-girls to be > 60% scale.

Except that, with the girl in small mode, I can see in the graphical interface that the cursor changes beyond 60% following the change in the registry. This is not the case here. This change is also permanent after restarting the program, which does not seem to be the case with your change in minutes.

So if I understand correctly, it only works temporarily while the program is open?


Sauf que je suis capable avec la dimension de la fille en mode petit, de voir dans l'interface graphique, le curseur se changer au delà du 60%, suite au changement dans la base de registre. Ce qui n'est pas le cas ici. Ce changement est aussi durable suite au redémarrage du programme, ce qui ne semble pas le cas avec votre changement de minutes.

Donc si je comprend bien cela fonctionne seulement de façon temporaire, pendant que le programme est ouvert ?

@BJlover Hi,
Thank you for your feedback.
Let me check with the team first.
Do not purchase it yet
Thank you

@Manue

It's been over two weeks, and I still haven't received a clear, definitive answer from the team on this topic.
Today I have the same problem with the f1923 e f1947 cards.
How do I know if the "barefoot" tag is correct?

I can't always hope that a forum member will watch the entire show and let me know if the tag is correct...
I would therefore like the tags to be accurate and relevant to the content.

I'm waiting for a response, hopefully a comprehensive one this time.

@whateverr1000

Thank you SO much!

You made my day!!

Have a great time!!!

😊

@JoKerMen Hi, Reset done : )
May I ask which email address did you send your email to ?

[email protected]

@JoKerMen

If you only need a reset then post in this thread.

https://www.istripper.com/forum/thread/28643/1?post=449733

and follow the instructions in the first post.

The thread is monitored and Moderators are able to reset installs (moderators are not able to see support e-mails but they can see Install Reset requests in that thread). Generally the moderators can respond much quicker than support for simple install resets.

Unfortunately there is no longer any support with "iStripper" and there has been no response to emails for days.
The chat bot doesn't help, real supporters are no longer available (anymore).
Account reset not possible for installation.
Pity

@CountDracula

Out of curiosity, I made the change in the registry as indicated by writing “3e8”. I restarted the program. I checked the software settings.

What is shown on screen is set by the GUI - it doesn't have a setting lower than 5 minutes so it can't show you what you set in the registry. If you move the slider it will write the new level into the registry but if you don't touch it, it should operate with the value you gave it.

It's the same method as where people have edited to allow desktop multi-girls to be > 60% scale.

I had originally posted a Random Shaders set up diagram showing the timer
(push scene change) checked. It has since been edited to unchecked

https://scenes.virtuastripper.net/SceneImages/RandomShader02.png

as it should be.. No clips are being cut short anymore unless it gets re-checked.

@EverthangForever or @Wyldanimal

How can we save the configuration of the number of seconds and the selection of subfolders in the RandomShaders.exe program, so that we don't have to reconfigure them each time we open the program? I clicked on “Save Paths”, but this has no impact on the backup of this data.

@EverthangForever ou @Wyldanimal

Comment pouvons nous sauver la configuration du nombre de secondes et la sélection des sous dossiers dans le programme RandomShaders.exe, pour ne pas a avoir à les réconfigurer à nouveau à chaque nouvelle ouverture du programme ? J'ai cliqué sur "Save Paths", mais cela n'a pas d'impact sur la sauvegarde de ces données.

Thanks for the image correction @EverthangForever.

@Calgon, Out of curiosity, I made the change in the registry as indicated by writing “3e8”. I restarted the program. I checked the software settings. It remains at “493e0” in the registry or 5 minutes minimum between scenes, with no possibility of adjusting below 5 minutes. I don't know how you did it, but the change is not made permanently in the program to give the possibility of adjusting at 1 minute, following the change in the register.


Merci pour la correction de l'image @EverthangForever.

@Calgon, Par curiosité, j'ai fait le changement dans la base de registre comme indiqué en écrivant en « 3e8 ». J'ai redémarré le programme. Je suis allé voir dans les réglages du logiciel. Cela reste à « 493e0 » dans la base de registre ou 5 minutes minimum entre les scènes, sans possibilité de réglage en bas de 5 minutes. Je ne sais pas comment vous avez fait, mais le changement ne se fait pas durablement dans le programme pour donner la possibilité d'ajuster à 1 minute, suite au changement dans le registre.

Bump on this. I would really like it if when you ***** select cards and get to the bottom of the page it scrolled down like it did on the old version. Currently it is very tedious to select more than the current page.

Any truth to this?

I had originally posted a Random Shaders set up diagram showing the timer
(push scene change) checked. It has since been edited to unchecked

https://scenes.virtuastripper.net/SceneImages/RandomShader02.png

as it should be.. No clips are being cut short anymore unless it gets re-checked.

I don't know if this is of help on this discussion as I don't use the random shaders app but if you don't like a clip getting stopped in the middle this might help . I've set my system up to have one active scene for every type of category plus a few extra ones in other themes (about 70 in all). If I press the "Play All Scenes Succesively" icon it will play all of my scenes in a random order. I'd set the "minimum delay between scenes" to 5 minutes (the minimum). Then after clips of over 5 minutes have played, the scene will fade and a new random scene start. Today I found that this 5 minute minum can be reduced further so that after the end of a scene of just one minute it will trigger the scene change at the end of the scene by editing it in the registry.

The registry key is at Computer\HKEY_CURRENT_USER\Software\Totem\vghd\parameters

I changed the value of "MinimumSceneDuration" to "3e8" which means 1 second - which I think the software rounds up to 1 minute.