@stripperfan

I hope we get to see your creations

@stripperfan I hope we get to see your creations

😄

I've got a number of fullscreen mode demos in the works. I think I've got a way of importing low-poly gltf files, and some ideas that use this capability creatively.

Is there a way to include two textures into one sprite's fragment shader?

As @WyldAnimal 's post shows this is indeed possible. Up to four sources per shader can be provided in this way. The limit is not an arbitrary one imposed by iStripper but comes from the GLSL language specification.

@istripperfan great we can learn off anything you do..
👍Be liberal with da .fsh code comments pls

Automatic 1111 is free.
But if you Don't have the GPU power to run it

https://beta.dreamstudio.ai/

Is very Fast as it's using a Cloud based Server Farm.
At default settings I think you Get 50 Tries for free.

https://playgroundai.com/

can generate 1000 free images per day. :D

@nightmage

I remember there were scenes someone made that would split the screen into boxes (4, 6, 8, 10, maybe more) with a model in each box. I can't seem to find these, though. Does anyone else remember these or can point me to them? Thanks!

See this Thread

https://www.istripper.com/forum/thread/29408/3?post=466568

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

The second series of "Experiments" that I uploaded today are a quite simple series of scenes based on using a large collection of flag images. There are scenes where the flags are used ase static or m...

and

https://www.istripper.com/forum/thread/29408/8?post=495099

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

I have uploaded a new set of scenes in which the girls occupy the doors and windows of various houses - or "houses". This started as a single scene in which the viewpoint was scanned from window to wi...

and these next 4 Starting here

https://www.istripper.com/forum/thread/29408/11?post=512807

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

After too long a break I finaly finaly have internet access again from somewhere that I can visit iStripper without upsetting anyone. I have a few new sets of scenes and a couple of sets of updated sc...

and this one

https://www.istripper.com/forum/thread/29408/14?post=520583

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

I have just uploaded an update to my "Misc" set of scenes. The new ones being as shown in the images accompanying this post. In the Reflective Pool scene the water ripples gently and the water fowl mo...

and here

https://www.istripper.com/forum/thread/29408/24?post=576493

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

Ok I made a scene but couldnt get a picture of it no matter how hard i tried so i had to make on so here it is. Let me know what you think. https://drive.google.com/file/d/157MQo-k2wGxqpbfNqzBsoCQUHmH...

Some Swings Here

https://www.istripper.com/forum/thread/29408/25?post=583852

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

So i decided to share another of my Scenes. Tell me what you think. https://drive.google.com/open?id=11NA8W7HPYLBAXFkm3XZc-svJy9UBXQc3

these

https://www.istripper.com/forum/thread/29408/26?post=590605

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

Hi all I made some more scenes. I know theyre not as impressive as fractals but I think there fun. Tell me what you think. Window Cleaners https://drive.google.com/open?id=1w2PR2kD-Gk3WmXXSR4Q4qkRAe7K...

these

https://www.istripper.com/forum/thread/29408/29?post=601354

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

I originally posted these a long while back. They are specifically for Glass clips. I needed space in my dropbox account some time ago and the original file got deleted. Someone has requested them so...

here

https://www.istripper.com/forum/thread/29408/29?post=602894

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

hey everyone i have fiddled around with my On Display scene and made an animated Christmas themed one hope you enjoy it some ***** adjustments can be made to turn it ino a regular animated version jus...

I stopped at page 37
Maybe I will Continue the Search.

https://www.istripper.com/forum/thread/29408/37

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

This thread will be Strictly for the member created Scenes for Full Screen and the Screen Saver. list of shared Scenes Thread https://www.istripper.com/forum/thread/42492/1?post=626142 Scene Discussio...

I think it might be these early ones from zebrazuk, but I can't find where to download them now.

https://www.istripper.com/forum/thread/27449/5?post=436558

Wszystko o iStripper / Discussions for Scenes for Version 1.2.X Fullscreen Mode here

As I actually had some time to spare today, here's a new way to crash your machines.;-) Yes, that's 15 shows and yes I don't know when to stop. http://www.kp3d.com/vgs.html I also split my scenes into...

@nightmage
Try Here
Scenes from @Zebrazuk
http://www.kp3d.com/VGStuff/vgsscenes001.html

Link from this Post

https://www.istripper.com/forum/thread/27449/13?post=459901

Wszystko o iStripper / Discussions for Scenes for Version 1.2.X Fullscreen Mode here

Created one more new shader scene and split my 4k stuff into shader and non shader scenes. Also did some fine tuning on a couple scenes and edited a few new colour versions of Caustic Water shader (Yo...

Awesome! Thanks!

@Wyldanimal - I use two Sources and Combine them in one Shader.
Sources can be Images, Shaders, clips

thanks , this worked for me, provided that for individual textures
combine.fsh was only applicable later in a sprite in the camera node. In other words, I had to apply
da same shader to each texture as an individual framebuffer pre-camera.

2 fairly simple questions:
1. Is it possible to turn the sound off when a clip's opacity is set to zero (e.g. during animation)?
2. Is it possible to have >1 clip from a playlist in a fullscreen without disabling 99% of the cards from My Collection entirely?

2 fairly simple questions:
1. Is it possible to turn the sound off when a clip's opacity is set to zero (e.g. during animation)?
2. Is it possible to have >1 clip from a playlist in a fullscreen without disabling 99% of the cards from My Collection entirely?

1. afik, no, there are no sound controls in the .scn (i had a look through the istripper code in memory while running)
2. if you use the "catagories" input to the clip define eg:

clip {
id: Clip
deny: behindtable, top, table, cage, pole, inout
category: bikini
}

will only play girls having the bikini tag, you can add more tage to get down to just one card but i dont think you can get down to one clip from that card.

I never use 'full-screen'.
However, I often use the playlist and next function in the desktop.
What if you were to go to the individual card, then view the clips list, then ***** the one clip to the 'next' in the 'now playing' tab?
Will this affect the full screen scenes and cause just the one clip to play over and other again?
You must ***** the clip to the 'next' list not the 'now playing' list. Also, make sure that 'repeat' is on. You see this at the bottom of the 'now playing' tab.

@Z22, @JonC001
Thanks for considering my questions.

I think @Z22 is right - if the 1st card in a playlist has a sound clip, the sound is heard even when opacity of this card/clip is set to zero. So it seems that the only solution is to unset the sound-bearing clips on the card at the top of the playllist - and all other clips from cards in My Collection which might play as 2nd or 3rd or 4th etc.... girl which might, in an animation, be set to opacity 0.

Unfortunately, it does not seem possible to select more than the first clip at the top of the playlist. However, by playing around with allow/deny and category, it does appear possible to get the 2nd or subsequent card from a playlist to be the one preferred cars/clip, as @JonC001 suggests.

https://www.istripper.com/forum/thread/29408/78?post=756358

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

Tks @WA :-) FG831-FG842 Twelve selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these sc...

@DrDoom9 ..Greetz & tks for posting your questions in da Discussion thread 👍

@ComteDracula

don't have the "ET - FractalGarden830.scn" scene. Is this an oversight?

Sorry, there is no FG830 . It is a 'number' reserved for the recent update

Désolé, il n'y a pas de FG830 . C'est un 'numéro' réservé à la mise à jour

@EverthangForever, it's like a scene is missing. Just a question like that, wouldn't there have been a way to name the update FG830a(update) and include a FG830 scene for example?

@EverthangForever, c'est comme s'il manquait une scène. Juste un questionnement comme cela, n'y aurait-il pas eu moyen de nommer la mise à jour FG830a(update) et y inclure une scène FG830 par exemple ?

@ComteDracula pas de problème. pour l'exhaustivité ..
Je vais m'assurer que nous inclurons un vrai FG830
dans le prochain nouveau groupe de scènes qui est publié.

@ComteDracula no problem. for completeness ..
I will make sure that we will include a real FG830
within the next new group of scenes that gets posted.

Thank you! 😊

Merci ! 😊

Just a quick question like that.

Why does the iStripper logo have to be in the scenes?

As far as I know these scenes can only be played in the istripper program.

It's not like an image that can be saved and put on another online site.

The use of this logo seems to me exaggerated in this case.

Thanks for the clarification.


Petite question comme cela.

Pourquoi faut-il qu'il y ait le logo iStripper dans les scènes ?

À ma connaissance ces scènes ne peuvent être lu que dans le programme istripper.

Ce n'est pas comme une image qui peut être enregistrée et qui peut être mise sur un autre site en ligne.

L'utilisation de ce logo me semble exagéré dans ce cas précis.

Merci pour les clarifications.

@ComteDracula
A partir du moment où tu peux faire une capture d'écran du show et diffuser cette capture ailleurs, le logo est requis puisque la vidéo de la fille appartient à Totem.

Just a quick question like that.

Why does the iStripper logo have to be in the scenes?

It doesnt really (totem don't require it), just came out of a discussion about Calgon's scene with the logo. But it might be a good idea as some people make videos and upload them on porn sites, some are affiliates, some are not and should be reported to customer support with a link to the site.

@ComteDracula
A partir du moment où tu peux faire une capture d'écran du show et diffuser cette capture ailleurs, le logo est requis puisque la vidéo de la fille appartient à Totem.

The girls used to have the S logo hidden on them, they stopped doing that didn't they?

@ComteDracula

Pourquoi faut-il qu'il y ait le logo iStripper dans les scènes ?

please read PM sent.

I had Suggested that Scene Creators Voluntarily add an iStripper logo to the Scenes that they Share.

An Example of this
add two small sections to your Scene Code

Add a texture at the beginning
and as a last element in the Camera
add the logo, Small and in a Corner.

example:

texture { //iStripper Logo
id: iStripperLogo
source: Small/iStripper.png
}
camera {
type: 3D
angle: 45
pos: 0, 0, 1240
target: 0, 0, 0

// your scene here
// your scene here
// your scene here
// your scene here
// your scene here

Sprite { //iStripper Logo
pos: -880, 400, 1
scale: 0.25
rot: 0, 0, -90
hotspot: 0.5, 0.5
source: iStripperLogo
}
// end of Camera
}

Sample Image from above code
https://www.istripper.com/customdata/forum/2023-01-19/dvA0Glbc.jpg

A member, after downloading the Scene to their own PC
could then just rename the Image in the Logo folder,
if they wanted to remove the logo from view for their own personal viewing.

This leaves the Splash Screen available for the Scene Creators own use.

I was wondering if there is a way to create a random float in a shader that is different every time the shader is run. I see lots of shaders with "noise" but it is the same noise every time the shader runs. I thought I might be able to use the shader input seconds "iDate.w" but I don't know how to capture its value just at the start and then not be updated over time.

Any help appreciated.

I was wondering if there is a way to create a random float in a shader that is different every time the shader is run. I see lots of shaders with "noise" but it is the same noise every time the shader runs. I thought I might be able to use the shader input seconds "iDate.w" but I don't know how to capture its value just at the start and then not be updated over time.

Any help appreciated.

I can achieve what I want on Shadertoy with the code:

float startSecs = iDate.w - iTime;
float randThing = sin(startSecs);

but do we have access to iDate.w on this platform ? I can only find u_Elapsed and u_WindowSize as uniforms people have used in other shaders ?

@Calgon
Have you declared iDate as a uniform vec4 in the shader preamble ?

uniform vec4 iDate;

https://www.istripper.com/forum/thread/27449/135?post=750090

Wszystko o iStripper / Discussions for Scenes for Version 1.2.X Fullscreen Mode here

The Shader toy shaders use these Inputs. Some or all of them. These must be converted to iStripper compatable inputs. Not all of these can be converted, so there are some shaders that just can't be us...

https://www.istripper.com/forum/thread/29408/78?post=756602

Wszystko o iStripper / Share your FullScreen - Member Created Scenes here

FG843-FG852 Eleven selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unless...

NB: For many of these scenes I have left in // commented the
method of using combine.fsh to mix textures/shaders in the .scn