I believe the same. The old Preview was better.
The new Queue is broken at adding too many previews, at downloading demos that are not deleted from the folders after they are no longer active and continue to fill the HDD.

small request, can we get the old "sort by" system back? i use model A-Z but in 2.0, it has reversed all of the card numbers

big request, can we PLEASE for the love of F@#K get the old queue system back? pre 2.0 was perfect, why change what was not broken.

edit: another small request, can we get an option to bulk / mass import old playlists instead of having to import them 1 at a time. (i'm sitting on around 550 😵)

The Store is better, but moving the Queue off of the collections page makes things less intuitive and more combersome when actually using the product. Highly recommend an update to revert that change.

She's still my favorite :)

With good reason!

@MattTheKing wrote:

How do I revert to the old version I don't like this versison at all it's ***** Beta of Stable does nothing it won't let me switch back

If you really want to go back read this post.

https://www.istripper.com/forum/thread/55259/2?post=794564

@8ScorpioN8 wrote:

I have such a problem, there is a show frequency every 5 minutes, and the show appears as soon as the previous one ends. I’m twisting the slider here, but still the show is in a row without a break. The slider does not work.

The Delay between shows slider is currently not working in version 2.0
it has been reported, but not by many members.

We need more members to report this issue.

How do I revert to the old version I don't like this versison at all it's ***** Beta of Stable does nothing it won't let me switch back

THIS! The randomization option to the right of the "Queue" button does NOT work to shuffle the queue. I would very much appreciate this ability!

Randomization works when you Add to the Que, it does not Alter the order of what is Already on the Que.

@Flori91 wrote:
i cant go back to the stabel version any help?

MODERATOR @stefnev1 wrote
@Flori91
In the setup, go to the section About and choose the stable version on the line Version type.

Note: Since 2.0 is NOW the current Stable version, you can't switch back using the drop down in the Settings screen.

The Only way to go back to 1.2.552 is to download it, and manually install it.

Do NOT uninstall. Install OVERTOP.

Edit: 04/04/2025
Current Stable 2.0.2 - version Build ( 1001)

Windows 64 bit: https://www.istripper.com/binary/versions/2_0_2/1001/x64/setup-istripper.exe
Windows 32 bit: https://www.istripper.com/binary/versions/2_0_2/1001/x86/setup-istripper.exe
MacOS: https://www.istripper.com/binary/versions/2_0_2/1001/setupmac-istripper.dmg

Prior Stable 1.2.552 - version Build (1005)

Windows 64 bit: https://www.istripper.com/binary/versions/1_2_552/1005/x64/setup-istripper.exe
Windows 32 bit: https://www.istripper.com/binary/versions/1_2_552/1005/x86/setup-istripper.exe
MacOS: https://www.istripper.com/binary/versions/1_2_552/1005/setupmac-istripper.dmg

older 32 bit version
This was the last 32bit version of the 1.2.3xx generation with the latest bug fixes in it at that time.
Prior 32 bit: https://www.istripper.com/binary/beta/1_2_380/setup-istripper.exe
Note: all Prior 1.2.3xx versions ***** from a serious issue and should be avoided.

Note: Some of your Playlists might have been converted to the New Playlist 2.0 format.
I wrote a Document on the New Format Here:
https://www.istripper.com/forum/thread/56679/1?post=796164

And in Case you Don't have a Backup of your Playlists and want to Convert from iStripper 2.0 format Back to iStripper 1.x.x format
I wrote a conversion utility in Python Here:
you need to have the Python Run times installed.
Google or AI is your Friend to learn how to install Python if you need to install it.
https://www.istripper.com/forum/thread/56679/1?post=796371

Let me know when the auto download of previews is optional. Then I'm in.

it has been optional for a long time now...
at least several months

Coucou !

Une Beatée 😘
Peut-on en voir + 💋👍

Can we change the dark theme?

You can set every background color you want to with this version. You can even mix colors.

thanks. next step a linux version please

@BreatFR I wouldn't hold my breath on this. On one hand, the previous version worked pretty well under wine so far. Sadly I can't get that new version to do the same (yet).

@jizzlobber

Clear the queue.
Select the random option.
Now add the playlist - it should now randomise it

@infinity38

Right click on a card and select "Edit Clips"

You do not have to be in the Card Details page. You can do it in My Collection or even in playlists.

Is there a way to set the queue to play at random like the old version? Thanks.

THIS! The randomization option to the right of the "Queue" button does NOT work to shuffle the queue. I would very much appreciate this ability!

The new version can be described as a success. The full-screen mode can be activated directly already in an earlier version of iStripper 2.0. It's working properly.
But: I still miss the option: “Play all clips”. Perhaps this can also be called up via the context menu (the cycle on the model).

Oops! I just noticed that there is a Q&A for version 2.0 here in the forum and a more succinct version of this question has already been asked. I apologize for opening a new thread needlessly. Please feel free to close this thread...

I updated to 2.0 today and have been searching for a way to shuffle my playlists when playing but am having no luck. It appears that when you start a playlist that there is no way to select a random play pattern. Am I missing something? If it, in fact, does not exist in this new version, can a randomization option for the queue please be added. I do NOT want to have to view playlists in a set order - I want to be able to shuffle the playlist like I could in the previous version. To be clear, the option for randomization to the right of the "Queue" button does NOT work to shuffle the queue!

After navigating a bit, I can't find one of the most important features I used all the time before:

Where is the UI that allows you to enable/disable and directly play each individual clip of a show?

Is there a way to rollback to the previous version? 2.0 feels like a big downgrade. The UI was much better befor (eg. clip select)

Two questions:

1. Is 2.0 still automatically downloading previews of every single show? I'm not talking about disabling playing, I'm talking about disabling downloading. I'm on an "unlimited" data plan that throttles me hard once I go past a threshold and I can't be downloading 150+ GB of previews I'm never going to watch.

2. How is the optimization compared to 1.0? When I tried the beta last summer the lack of optimization was ***** bad. Has it improved considerably?

Just reading through this thread and the the 2.0 Beta thread, it sounds like neither one of these have really been addressed.

Full showf1784 - Kelly Collins / Last Minute ShoppingOkay, this isn't the best riding show, per se, but Kelly kind of rides her fingers for a bit in one clip. In the last clip she does a rear-facing ride while holding the toy, but it's short (less than 30 seconds). I include this on the list because Kelly does sexy rides, and even though this ride is short, the show is very sexy. Your mileage may vary.

She's still my favorite :)

how to select clips?

how do I revert to the other version?

I don't know if I have some setting wrong but ... I just Auto loaded the pushed Ver 2.0
Now when I watch a show in Full 4K, every clip freezes when it ends (does not close) however in small mode, they close normally and the next clip plays.
Also after clicking Start.. when I click the 'Skip the show' button, it closes the clip but does not do anything else. Always says 'Skip the show' and wont won't resume
Selecting a different card then going back, it changes back to Start and works for one clip freeze again

For me, this is unusable... going to go back to V1 stable unless this is just a 'settings' issue.

I just upgraded to 2.0 and I am seeing an issue where the shows are freezing. It looks like when the clip is over and will usually change to a new clip it will sometimes but not all the time freeze. When this happens I will need to click the "Next Model" option to unfreeze it. This is happening way to often to be usable. How do I revert back?

f1784 - Kelly Collins / Last Minute Shopping

Okay, this isn't the best riding show, per se, but Kelly kind of rides her fingers for a bit in one clip. In the last clip she does a rear-facing ride while holding the toy, but it's short (less than 30 seconds). I include this on the list because Kelly does sexy rides, and even though this ride is short, the show is very sexy. Your mileage may vary.

Enable and Disable card buttons in Collection are not working / are disabled. The Queue is very laggy, freezing the whole app, especially if you are removing cards from it and previews are added automatically.

@mitchell

Now aim pointer at middle of screen and hold down grip button not trigger

Thanks for your answer, I was already familiar with this control. When viewing in a full screen SBS show, ***** the screen towards you in this way makes it appear to be closer (and therefore bigger) for a 2D show that's fine but not for 3D in SBS.

After giving the matter more thought, the answer is for me to somehow create SBS backgrounds that give the impression that they are further away to start with and I don't have a tool to do that. (yet)

How to make the girls' cards smaller in Collection?

@Number6

Probably not exactly as you want

Thanks @Number6

Yeah - it's still not there for me. For a predominantly full screen / queue user this is very fiddley to work with. Trying to add one particular clip into a show is just too many steps. Try doing that while wearing VR headset as well.

Any way to revert back to the previous version. This version does not allow shift clicking which makes it extremely not user friendly. It does not allow me to shift click to import my very large playlist. It does not allow me to shift click to decide which shows to enable and disable. I ***** about this in beta. I don't understand why a developer would disable such a basic and important feature.

Is there a way to set the queue to play at random like the old version? Thanks.

Why is my forum text dark text on a dark background? It's unreadable and frustrating. Can't figure out how to change it.

@infinity38@EvaneselfSee this thread re: Disabling Previews https://www.istripper.com/forum/thread/56236/1?post=792083

Thank you. The app doesn't launch anymore for me (stuck on loading screen) so I will look at that later when it decides to work again.

@Calgon

Can someone remind me....
:How do I import a vpl playlist ?

Select My Playlists then Click on the + sign in a circle (Add Playlist) and select Import

Can I export a playlist ?

Right Click on the playlist Playlist tou want to export and select Export.

Can I see/manage the queue while on the fullscreen page ?

Probably not exactly as you want but when on the fullscreen page you can click on the Queue button which will open the Queue page. You can then click the "back arrow"on the menu bar and this will take you back to the fullscreen page.

HTH

I like to view and delete unnecessary clips after downloading a show model. In the new version of the program, it has become much more inconvenient to do this. And also there is no preview tab, where I could view them. And also there is no filter for sorting by year. In general, the new version looks good, but it has become much more inconvenient to work in it. You have to make a lot of unnecessary movements. I am not happy.

@infinity38
@Evaneself

See this thread re: Disabling Previews

https://www.istripper.com/forum/thread/56236/1?post=792083

I have such a problem, there is a show frequency every 5 minutes, and the show appears as soon as the previous one ends. I’m twisting the slider here, but still the show is in a row without a break. The slider does not work.

weird ! Did you try to quit and double click the exe again ?

Tried several times.

I've installed it directly through the app without issue. It was just the downloader via website that was causing a problem for some reason.

Thought I'd give this a try again.... still finding it unintuitive for what I want to do.

Can someone remind me.... :

How do I import a vpl playlist ?
Can I export a playlist ?

Can I see/manage the queue while on the fullscreen page ?

Can we change the dark theme?
Can we stop Free Preview?

weird ! Did you try to quit and double click the exe again ?

Well I'd love to install it but I don't get the option.

https://i.imgur.com/6dT1r10.jpeg

It tells me where it's going to install, but doesn't give me any buttons to proceed. 😂

Win 64bit installer.

Just did the update and I quickly realized that this new version was immediately downloading previews I never asked to be downloaded. I remember disabling preview downloads in the old version with the "never" option in the dropdown but that option seems to be gone now.

Are we ***** to waste disk space with random downloads that we don't care about now or am I missing the new way to disable this?

For now I quit the app to stop the unwanted downloads. Even if I click the X to cancel all downloads, they automatically come back.

Update is excellent! It only misses proper scrolling on MacOS (no horizontal scroll and uncomfortable vertical scroll when scrolling with pointer hovering over certain areas). Also it would be better to have "Add to wishlist" button on a show page.

a Natural beauty 😍 and a sexy performance 🔥

Indeed - perfect combination of cute and sexy! 😍

Hello, please bring back play all clips when right click on play button.

Thanks for the info. It was sneaky of iStripper to hide that functionality. Without your help, we would be lost!