Wikki is really 'hands on' in the finish of this show, love it💖 and that outfit looks very sexy on her 😋😎

Get a sneak peek at our next brunette beauty!

Wikki is a great discovery for iStripper, and her VR show is sure to amaze you!

On your headsets, get set, go! https://www.istripper.com/vr180/detail/d8c43c6472280fa9

I love her hairstyle in this. She looks great in short curly hair.

f1735 - Ashby Winter / Harleen The Queen
Ashby is so good! She starts with a slow, teasing, front-facing ride in which she slowly speeds up and gets more and more turned on. This first part lasts over 2 minutes! Next, she does kind of a half-split, side-facing ride that is very unique and sexy. This lasts for nearly 2 more minutes, and then she quickly turns to a sort of rear-side-facing ride to finish out the clip (for about a minute). She turns to look at the camera a lot, here at the end, and I'm pretty sure she reaches climax. Nearly all of this clip is spent riding the toy, and it's great!

Ladies, our doors are wide open! Come back soon!

Totally agree, Emiri and Polly are over the top and I really want to see her here for multiple shows after the ones shooted yet 😍

Emiri... Emiri... dear Emiri... this "Mission To Seduce" has been such a success that I can count on the fingers of one hand the members who have not purchased it yet... and it's probably cause they can't stop watching "Flowers On My Skin"...

How obvious and right it was to elect her Talent of the Month of June!

Especially knowing that "A view To A *****" will be released on Wednesday!




Polly Yang's first show was a resounding success! This young lady is a blond perfection! Can't wait to see if her second release ''Cutaway To Heaven" will be in June Top sellers!!!



iStripper truly boasts the most beautiful models of the moment, thanks to its top-notch casting team and agencies!

The quality of our videographers, makeup artists, and stylists does the rest, thanks to their amazing talent for bringing out the best in these young beauties! Without forgeting our post production team, with such skills to proceed with the content with such qualities!!!

Ladies, our doors are wide open! Come back soon!

@WyldAnimal
I very much appreciate the work you did to decode the new V4 playlist .vpl files.
I have not had cause to learn and use python; I am a simple Excel VBA man.

Initially, in the old version, I wanted a simple way to re-create the even-older .plf files with the model name in plain text so it could be read easily. There is less need for that in the new version as the names within a playlist are displayedin the GUI.

Thanks for the updates to your documentation.
Regards, DD

Ah, ctrl+a, I'll try that out after I've fixed my card cycling issue.

Deleting entrances.dat didn't help, and neither did changing the size slider. None of my programs are set to a non-standard scale. I'm on two 22" monitors, so nothing complicated about that. I'm using an Nvidia RTX 2070 Super. Files are on a 4TB SSD hard drive with 486 GB free.

does anyone have a download link for v2.0.3?

please and thank you

I changed it just now. The issue was that I could not even get to the settings menu. the application would crash when I clicked anything, most times just not responding right from launch. I was able to get it working for now, hopefully it stays that way.

Lots of variations of this listed in the bugs section of the forum. Developers are looking at it, but for now, advice is to click on "Synchronise with Server" option to rebuild your collection

In my experience my collection is all still there but for some reason the software cant see it.

Hi have a problem with the last update the software show some problems, not showing new card pictures i think is the problem with new versions, if reintall show lla work fine, but if use the past directory with all data, dont show again, the problem is that I don't want to download the entire collection again—it's very large. So how can I make the program detect the cards already there without having to download them again in a new installation?

@Dervo wrote this:

One example is: In the previous version I was able to make vpl files for groups of girls and freely add them to my queue, now I have to import the vpl files to a playlist and then play those... but it doesn't seem like I can add multiple playlists to my queue at the same time. Is there no functionality that allows us to have a group of girls with oil, cosplay, leather, and orgy: then choose multiples of those when we want to? Do I need four playlists for each of those, then 3 for oil/cosplay, oil/leather, oil/orgy, then 3 for cosplay/leather, etc, etc, etc? Because I've got 20+ that I like to mix and match.

I have a playlist for almost Every Category, Year, Hair Color.. etc Many Many Playlists...
These are just the ones I currently have Loaded.
https://wyldanimal.com/videos/My-Many-Playlists.mp4


Here is a demo video of how to combine multiple playlists in the Queue
https://wyldanimal.com/videos/Howto-combine-multiple-playlists-in-the-Queue.mp4

I have Random and Loop modes enabled ( Not a requirement, just how I have it set )
In my list of Playlists, I click on the Playlist I want to add 1st to open the Playlist View.
Then I click an Empty space between cards.
and then use CTRL+A to select ALL of the cards.
Then I right click one of the Selected cards, and Add it to the Top of the Queue

I show the Que now has these 73 cards in it.

Next I switch back to the playlist view, and pick out another Playlist I want to combine in the Que.
I repeat the Steps.
Click to open the playlist
CTRL+A to select ALL
RIGHT CLICK a card, Add to Bottom of Queue

Repeat the steps for all of the Playlists you Want to combine together.

Hope that Helps.

Another Member recently reported lots of problems and related it to a recent AMD GPU drive update.
This member didn't start to have Issues till after the AMD GPU update.

They rolled back their AMD drive to a previous Version and the iStripper issues went away.

Another case that caused clip / Card Cycling
was on a 4K screen, the user had Windows Scaling set to 150%
I think it was a 23" sized screen in 4K resolution and the Print at 100% scaling was too small
so the User had the Windows Scaling at 150%

Adjusting the Windows scaling to 100% cause the cycling to stop.

Adjusting it back to 125% or 150% cause the cycling to come back.

I'm just tossing out things that I've come across before, to see if any of them are related.

To Solve the Issue, we need to be able to pinpoint the cause.

Thank you for your help.

In some case when there is Clip / Card Cycling in the Queue
Where a card is shown in the Now Playing and then is immediately replaced by a different card / clip

While the now playing is cycling
Switching to Settings and Adjust the Small Size Slider has corrected this.

this is something else that you can test.

In another Help thread,
other Members reported that Deleting the
entrances.dat
file in the DATA folder Helped.

Quit iStripper
Browse to the DATA folder
Delete the file entrances.dat
restart iStripper
can you play your Table clips?

Here again are my updated VPL files:

The Structure information:
https://wyldanimal.com/files/iStripper2-playlists-explained-by-wyldanimal.zip

A python Script to decode to a text file the iStripper 2.0 format Playlists.
https://wyldanimal.com/files/VPL2-to-Text.zip
This is the same script as below, except I disabled the Text to VPL conversion, so only the Text file is output.

A python script to convert from the iStripper 2.0 format Playlists Back in to a iStripper version 1.x.x.x format.
https://wyldanimal.com/files/VPL2-to-VPL1.zip
This is the same script as above, with the conversion from the Text file to the VPL file enabled.

A python script to convert an iStripper 1.x.x.x VPL playlist in to an iStripper 2.0 format VPL Playlist.
https://wyldanimal.com/files/VPL1-to-VPL2.zip

Please Note:
I ***** writing python scripts.
I code these up in a Text editor, and One wrong space, or Tab will Mess everything up..
Don't mess with the spacing...

And I wonder why they used 5 status bytes per card

I decoded the format, and that is what I called these 5 bytes.

It may well be that the use of the 1st 3 bytes of this 5 byte group, is unknown to me, and that only the last 2 bytes are used to determine how the Clips / Cards in the List should be decoded.

But to make it easy for my self to process the New Playlist files,
I just grouped all 5 of these together.

My Publication of the version 4 Playlist structure is my own work.
I was not given information from the developers.

So the terminology that I used is my own, for my own reference.

I don't want to mislead anyone in to thinking that what I shared about the Playlist Structure
Is in an Official capacity.

It is all of my own discovery.

@schnaenyc
Try to log out/log into via the app with your actual login/password.
Check if the Models path is the good in the setup of the app.

I have been a member since 2010 and just downloaded on new computer but can't find my collection

@ShadowxPunk
Have you tried to change the renderer from GPU to CPU in the advanced settings ?

@Wyldanimal
Thank you very much for your response.

I did suspect that the "Favorite" playlist was created by the Totem software, and might be special.

I have others, which I have created, and have the new filenames "Collection_n", with the playlist name in the header. I suspect that this was necessary to allow backward compatibility with Version_Number 1 playlists, which still do work.

It is all rather (over)complicated!
And I wonder why they used 5 status bytes per card, rather than 1 byte with up to 8 ststus bits?

But again - thanks for your spport and help.

Does anyone else have an issue that when they open the app that it will just freeze when they try to start a show? For the past year or so I have not been able to use the app because it constantly freezes on me which causes me to ***** shut it down. With this new update it works a little better but still freezes on me when I try to enable a show when it is currently downloading another show. Tried uninstalling and reinstalling multiple times.

No, I ***** auto-hide. Keep them to visible at all times, and I didn't have a full screen application hiding it either. Could there be a reason that clips might be trying to play below the taskbar anyway? Any settings that lower the starting spot of table clips compared to other shows? They'd probably be a microsoft 10 setting instead of an istripper setting though. I've exhausted my search with those settings.

XXX are enabled, even tried only enabling XXX with girls that only have table clips for that setting. Nothing plays, just tries to infinitely.

Edit: Also, I tried deleting a specific girl that only has table clips for XXX and then redownloading in case there were issues with the previous download. That didn't help.

Edit2: Thinking about it, I don't do anything strange with my microsoft settings, so it's probably not that. I'm kind of wondering if some files in the bin and data folders are a problem. With some of the files downloaded as early as 2010, something might be questionable there. I've obviously updated the program, but if system.dll is from 2011 is that an issue? I prefer not to touch important background files without someone walking me through it, so I've just been leaving all the dll files alone.

Sorry for the late reply, busy week. But yes, they fail to play when I set eroticism to all, and fail to play when I set it to XXX only. When I do this it just continually tries to play clips but fails.

Emiri Momota - A View To A ***** - f1870 - iStripper XXX
Hilary C - Dressed Short - e2063 - iStripper
Nikoletta - A Little Something - f1837 - iStripper XXX
Alexis Crystal - Hello Nursey - e2079 - iStripper
Alice Kiss - Strawberry Kiss - f1884 - iStripper XXX
Mia Bloom - Angel's Breath - e2049 - iStripper
Norah Juliette - The New Assistant - f1891 - iStripper XXX

Maybe, but the credits themselves still represent a monetary value. Just like a poker chip isn't money per say, but it does represent one (and why casinos have gambling licenses).

Unlike Poker chips, you cannot exchange credits for cash.

Under the Totem Terms and Conditions:

YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE CREDIT SYSTEM HAVE NO MONETARY VALUE AND CANNOT BE REDEEMED FOR CASH. NO REFUNDS WILL BE MADE FOR THE PURCHASE OF CREDITS.

By using the software you have agreed to the Terms and Conditions.

Hello everyone.

I don't often write on the forum, but this time I would like to talk about some aspects that have led me to have a certain disappointment towards the iStripper support team.

Sometimes I have small problems (cards that don't download, difficulty synchronizing with the server, problems accessing my account, etc.), but these are all things that are generally solved quite easily.

What bothers me, however, is the fact that every time I contact customer support for any problem, I am ALWAYS told to update the software (which I don't do because, until it is inevitable, I have no intention of installing the new version of the software which, at least according to many users, is not stable and still gives various errors).

Since I don't think I'm the only one who can have these problems, I would like the support service to try to give me a "real" technical answer on how to overcome the problem that occurs from time to time, without always repeating to update the software.

Furthermore, despite being a “Premium” member, I have never found any real speed in the support service’s responses: often I see that there are faster responses in the Forum than in the tickets I open.

Then I am very annoyed by the fact that many topics are only discussed on an external platform (Discord), to which I am not registered and to which I have no intention of registering: I do not understand why, instead of discussing the topics proposed by users on “our” forum (where there are only iStripper members), we have to resort to an external platform where anyone can have access. I do not believe that Totem does not have the skills and the possibility to manage the forum, as it always did until two years ago.

Finally, I don't like the Totem's policy to want to unify the various commercial proposals (iStripper, Dolz, NFT, auctions, crypto-currencies, etc.) within the same software environment: one of the reasons (in addition to the stability not yet achieved) why I don't want to update the software is precisely to keep the commercial offers separate from my iStripper environment, where I only want to see beautiful girls dancing and undressing and nothing else...

It seems there is a threshold of 30 days set for this game, but nothing in the instructions.

Oui, pour ce jeu, c'est 30 jours. Pour d'autres jeux, ce sont les cartes de moins de 45 jours qui sont exclues.
C'est assez déroutant et j'aimerais que la règle soit la même pour tous les jeux.
De préférence 30 jours ou encore mieux : 0. 😉

Yes, for this game, it's 30 days. For other games, cards less than 45 days old are excluded.
It's quite *****, and I wish the rule were the same for all games.
Preferably 30 days, or even better: 0. 😉

I try to download models with the latest version and it says Download Error. I have Norton 360 and I have allowed iStripper access but still doesn't work!

I would expect that cards new than 45 days are NOT part of the event.

It seems there is a threshold of 30 days set for this game, but nothing in the instructions.

My key question was: if I can't fill the rack, why is there no warning that I will not be able to win any cards? Usually there is such warning in the games: It makes no sense to play in such instance, and i would have saved quite some credits.
Alternatively, an option to buy an uncomplete rack if it cannot be filled, or adding gift cards woud be acceptable.

The eldest regular card I do not own was reelased 50 days ago.

It looks like you only have 32 cards not in your Collection.
Winning cards newer than 45 days old are normally excluded from TGIF events,
Unless the event Specifically states they are Included.
So I would expect that cards new than 45 days are NOT part of the event.

Do you have your Task Bar set to AutoHide?
So that NO task Bar is Displayed?

Table clips would Sit On top of the Taskbar, or a few pixels below the top of the Taskbar.
In some cases if there is no taskbar, the clip is set a few pixels below the screen and then doesn't play as it's "off screen."

If your Taskbar is set to autoHide,
can you test by changing it to not AutoHide, and see if the Table clips play?

Usually, unless you have a gambling license, any form of chance must reward you with something of at least the value you "paid" with, if not more. But do they do that here?Welcome back (if you haven't been around in a while...) I think the legal work around for the gambling concern is that we do not spend money. We do not win money. It is credits. You spend credits that have no value.Many on this forum do not like the NFT, SEC nor gambling. You are not alone.Totem is a company that makes money. It will do what makes money. Most of the product is something I like. I will spend my credits (credits!!!) on the items I like.

Maybe, but the credits themselves still represent a monetary value. Just like a poker chip isn't money per say, but it does represent one (and why casinos have gambling licenses).

That said, yes I have been out for too long. Even longer since I bought a card. So I am trying to get caught up on it all

I am playing and playing with max bet, but no card symbol gets added after two cards in the rack.

I did not read anything about a relaease date limit. The eldest regular card I do not own was reelased 50 days ago.
Whatsoever, I would expect the board is filled with 5 cards, unless I get a warning before starting to play. Is there a bug?

@Spling83

I just updated the Search Strings.
To Include all of the "Dorcel edition"
and the cards of "Randy Ayn"

1) Playlist "Favorite"

The Favorite.vpl file is a special case of the New VPL format.
The Header of the Favorite.vpl does not contain the two Gradient Colors that the other vpl files have.
Instead it has 8 bytes of FF

##############################################################################
The Header section of the favorite.vpl:
4 bytes 00 00 00 04 <-- version number

4 bytes 00 00 00 1e <-- length of playlist name 1e = 30

1e or 30 bytes from length above <-- the playlist name in 2 bytes per character 00 1st byte

4 bytes ff ff ff ff <--- Skip Over

4 bytes ff ff ff ff <--- Skip Over

4 bytes 00 00 00 01 <-- number of cards / items in the playlist
End of the Header Section
##############################################################################

I am having the same issue, Table clips for certain shows wont play, but for other older shows they will. So far I am only having trouble with new shows I bought since this new update. Definitely not an XXX issue in settings, playing other xxx clips just fine.

I have looked at several similar .vpl files.
Bytes 4 & 5 are sometimes 00-00,

Yes, some time Since I wrote the Doc
The use of the Status bytes added the new combination of 00 00
this signifies that ALL clips are Enabled.


##############################################################################
Looking at Just the Last 2 of the 5 Status bytes
00 00 <-- Include the full card <-- Special Use of the bytes
01 00 <-- Include the edited card of all of the clips
00 01 <-- Exclude the edited list of clips
01 01 <-- Include the edited list of clips
##############################################################################

@WyldAnimal
I am grateful that you have documented the new format of.vpl files.
I have written an Excel VBA file to list the 'internal' playlist name, card names, and card clip names, as well as the 5 Status Bytes for each card.

The document describes the function of the 4 Status Bytes, but I have a playlist where this description fails.


1) Playlist "Favorite"
This comprises 6 Cards
clips in the GUI in the playlist .vpl
cards and clips in the playlist .vpl total enabled/disabled Status Bytes 4 & 5
e0083 clips=1 e0083_6144507.vghd 19 19/ 0 1 1 (include edited list)
a0448 clips=2 a0448_1111.vghd
a0448_33114.vghd 29 2/27 1 1 (include edited list)
f0196 clips=1 f0196_2052403.vghd 17 16/ 1 1 1 (include edited list)
e2036 clips=1 e2036_6148402.vghd 19 19/ 0 1 1 (include edited list)
f0179 clips=1 f0179_sc3_9401.vghd 13 13/ 0 1 1 (include edited list)
f0251 clips=3 f0251_1024401.vghd
f0251_1024402.vghd
f0251_1024403.vghd 15 12/ 3 0 1 (exclude edited list)

I understand a0448 and f0251
I do not understand e0083, f0196, e2036, f0179 as the GUI shows ALL clips enabled, not just the 1 in the .vpl file. Why has one clip been entered in the .vpl file at all? Could it have something to do with the fact that ALL the cards are flagged as favorites?

I have looked at several similar .vpl files.
Bytes 4 & 5 are sometimes 00-00, when the GUI suggests (probably correctly) that all clips are enabled.
I have also seen combinations 01-00 and 00-01, which do seem to match the documentation from @Wyldanimal

Any comments?

Is it possible to earn Joker Cards in the new Slot Machine?

Désolé, mais cette machine a sous ne vous permettra pas de gagner un joker.

Sorry, but this slot machine will not allow you to win a wild card.

Bravo à Emiri. Une femme d'une grande beauté, que j'adore. ❤️

Here is a post that may contain all of the removals: https://www.istripper.com/forum/thread/40970/1?post=694432The post was updated this morning.

From what I can see, the list is incomplete. Randy Ayn still isn't on the list. Also the Dorcel Cards seem not to be on the list. I personally like the lists with the search strings. But of course additional information in a new topic is in some cases more useful. Or a specific topic on Discord like the ones, which tells about updated shows would be great.

@Wyldanimal will the search strings on the link still be updated?

Is it possible to earn Joker Cards in the new Slot Machine?

@Manue, sent screenshot in email.

@bartman666 Hi, Could you please send send me a screenshot to [email protected] ?

Thank you

@bartman666
I'm using the same version as yours (2.0.005 build 1000 beta) and I have the full UI to play the new Slot Machine (see pic).https://www.istripper.com/customdata/forum/2025-06-06/xhqf1qZk.jpg
Try to quit and restart iStripper.

In fact, I think it's a waste that we don't see more cards of hers wearing tight dresses (especially long-yet-tight dresses, but this is more of a fantasy of mine). She has the perfect blessed figure for that.

Thank God It's Friday and we're in the middle of a major event with the release of our brand-new Slot Machine yesterday that already records dozens thousands spins and an average discount percentage of 49%, on top of your VIP level discount!!!

But look, let's keep the good habits and review our beauties of the week, including the new Danna about whom your comments speak volumes !!

• First release of Danna !! What a lovely fresh beauty, so hot in this "Bedroom Playmate" lingerie set!
• Oh My !!! Toree is totally irresistible in this "Glittermore" transparent dress!
• Shelena had some 'Lezioni Di Sesso' to share with you all on Wednesday
• Liaa Sea is super gorgeous in this brown bikini to spend "A Day At The Sea"
• Summer again with Moona Snake in "Sweet & Sour"! Initially set to become a NFT, we couldn't refrein from sharing it with you all!
• Audrey Reid wears the blue like no one ! "Deep Blue Love" is a pure delight! It seems that this lingerie set had been worn by Lilly Bella a few years ago... BTW, don't forget to cast your vote for Lilly Bella's come back !!
• What a sexy dress !!!! Polly Yangs is stunning in "Cutaway To Heaven" !

In VR 180:

you had the chance to discover Norah Juliette before the release of her shows (next Friday) !
https://www.istripper.com/vr180/detail/092375f0ce755726


NEW SLOT MACHINE

Friday visitors, welcome !

We exceptionally released our promo game yesterday but it's not too late to enjoy!!!
Visit the Event tab of your app and enjoy!

Here are the details of this new slot machine :
https://www.istripper.com/forum/thread/57168/1