I wasn't really sure where to put this, but a week ago I registered for Hentai Heroes to get the advertised 25 credits upon registration. Well, I registered and played for a while but have not seen the promised credits. When can I be expecting them?

😍😍😍

Amazing ! Polly Yangs is our TOP SELLER of July, slightly above Emiri Momota!

This sublime blond angel is indeed a pure delight and you have all understood it!

This is all the more significant as it is her fourth card to achieve this success, proof -if any were needed- that Polly is a real gem! Each performance is exceptional and deserves to be collected!



And the ones of you you succeeded in getting her EX card "I nee a Splash" can only be pleased about it!



Of course, she is followed very closely by your queen, Emiri Momota and her adorable cosplay which made your heads spin and captivated your hearts!





And I'm super happy to see that you fell like me for the exceptional performance of Ave Deva, so aphrodisiac as a sexy gamer!



Needless to say, I strongly encourage you to come and discover her other cards; such a promising model!

Here is one of the revelations of the year !!!
Miss Reina Ohara, in an AMAZING cosplay !

Enjoy !

https://www.istripper.com/vr180/detail/6502c51f45e6c590

@cobrasu,

Click on the Queue button. Click on the 3 dots and select the frequency to 6 shows. Then click on the button disable/enable previews to toggle it between enable and disable.

Make sure the button says 'enable previews'. If it says 'disable previews', then the previews are still enabled.

How to disable free preview frequency?Why not add a disable item?

@BJlover Thanks. You too have avery nice day!!! 😊

Issue fixed. Thread closed.

Use your Phones Mobile web Browser
https://www.istripper.com/models
then set you browser option to display Desktop site.

@Wyldanimal

Thanks!

@whateverr1000

Thank again!

Have a very nice day!!!

😊

@BJlover f1947 Shoes stay on in 7 clips (4 pole and 3 standing clips). Shoes come off but stockings stay on in 2 clips (1 Standing and 1 table). Start with no shoes but stockings stay on in 1 table clip. And in only 1 table clip she starts with no shoes and she takes stockings off.

Setting: Minimum Delay between Scenes

This is counter of total clip play time. When the total clip play time Has exceeded the set value
then the Next clip will trigger a Scene Change
So both the Clip and the Scene will start together.
The Timer will be reset and start over.

https://www.istripper.com/customdata/forum/2025-08-19/WTa9qHbs.png


The Minimum set by the GUI slider is 5 minutes or 300,000 milliseconds

But you can set a lower value if you quit iStripper, and make a registry edit
Branch:

Computer\HKEY_CURRENT_USER\Software\Totem\vghd\parameters

key:

MinimumSceneDuration

Put a check in Decimal

https://www.istripper.com/customdata/forum/2025-08-19/O4yKHV7b.jpg


Then set the Time in Milliseconds 1000 = 1 second
60,000 = 1 minute
https://www.istripper.com/customdata/forum/2025-08-19/RKfUui4H.png

20,000 = 20 seconds
https://www.istripper.com/customdata/forum/2025-08-19/c03D1RMR.png

Restart iStripper,

Now the Scene will change after the end of a clip that lasted longer than your New Time you set.

If you touch the slider in Settings, It will reset the Value Back to a minimum of 300,000 = 5 Minutes.



Paramètre : délai minimum entre les scènes

Il s'agit du compteur de la durée totale de lecture des clips. Lorsque la durée totale de lecture des clips dépasse la valeur définie,
le clip suivant déclenche un changement de scène.
Le clip et la scène démarrent donc simultanément.
Le minuteur est réinitialisé et recommence à zéro.

https://www.istripper.com/customdata/forum/2025-08-19/WTa9qHbs.png


La valeur minimale définie par le curseur de l'interface graphique est de 5 minutes ou 300 000 millisecondes.

Mais vous pouvez définir une valeur inférieure si vous quittez iStripper et modifiez le registre.
Branche :

Computer\HKEY_CURRENT_USER\Software\Totem\vghd\parameters

Clé :

MinimumSceneDuration

Cochez la case Décimal.

https://www.istripper.com/customdata/forum/2025-08-19/O4yKHV7b.jpg

Définissez ensuite la durée en millisecondes. 1000 = 1 seconde
60 000 = 1 minute
https://www.istripper.com/customdata/forum/2025-08-19/RKfUui4H.png

20 000 = 20 secondes
https://www.istripper.com/customdata/forum/2025-08-19/c03D1RMR.png


Redémarrez iStripper.

Désormais, la scène changera à la fin d'un clip dont la durée est supérieure à la nouvelle durée que vous avez définie.

Si vous touchez le curseur dans les paramètres, la valeur sera réinitialisée à un minimum de 300 000 = 5 minutes.

Traduit avec DeepL.com (version gratuite)

*bump*

@BJlover Thanks. You too have a great time. 😊
f1923: Shoes stay on in 4 clips (1 standing 3 pole clips). Shoes come off in 3 clips (1 standing, 1 pole and 1 table clip). And she starts with no shoes in 6 clips (3 standing 1 pole and 2 table clips). All 3 table clips are SE.

@JoKerMen

From the User Manual in the "Help Centre"

Can I install on several computers ?
Yes. We grant you a licence for two computers.

Once you have installed iStripper on one computer and created your account, install the software on the second computer and register using the same login and password.

If it happens that you need to install again, make sure you uninstall one licence first (without uninstalling your collection).

If you encounter a message too many installations please contact the customer service.

HTH

I can see in the graphical interface that the cursor changes beyond 60%You're quite right - that probably got changed in the GUI and I never noticed because I don't use desktop mode.

This was also the case in version 1.0. You just have to avoid going below 60%, otherwise it will display a maximum of 60% again in small mode, and you will have to redo the changes in the registry.

I always have two girls playing in small mode at 82% size.

That's why I didn't understand why this change wasn't also made in the program's graphical interface for the minimum delay between scenes.

C'était ainsi aussi sur la version 1.0. Il faut juste éviter de passer sous la barre des 60%, sinon, elle affiche à nouveau un maximum de 60% en mode petit, et on doit refaire les changements dans la base de registre.

Je fait toujours jouer 2 filles en mode petit à la dimension de 82%.

C'était pourquoi je ne comprenais pas pourquoi ce changement ne s'effectuait pas aussi dans l'interface graphique du programme pour le délai minimum entre les scènes.

I can see in the graphical interface that the cursor changes beyond 60%

You're quite right - that probably got changed in the GUI and I never noticed because I don't use desktop mode.

On how many devices (PC/laptop) can iStripper be used with the same account? Since I can only watch on one device, simultaneous use wouldn't be possible. I can't find any information about this anywhere. After reinstalling or changing devices, my account has been "locked" twice in five years, meaning it wasn't possible to reactivate it until after reactivation.

How can we save the configuration of the number of seconds and the selection of subfolders in the RandomShaders.exe program, so that we don't have to reconfigure them each time we open the program? I clicked on “Save Paths”, but this has no impact on the backup of this data.

Well I thought so too. Multiple settings in a drop down window or somesuch 😪

Eh bien je le pensais aussi. Plusieurs paramètres dans une fenêtre déroulante ou quelque chose

@CountDraculaOut of curiosity, I made the change in the registry as indicated by writing “3e8”. I restarted the program. I checked the software settings.What is shown on screen is set by the GUI - it doesn't have a setting lower than 5 minutes so it can't show you what you set in the registry. If you move the slider it will write the new level into the registry but if you don't touch it, it should operate with the value you gave it.It's the same method as where people have edited to allow desktop multi-girls to be > 60% scale.

Except that, with the girl in small mode, I can see in the graphical interface that the cursor changes beyond 60% following the change in the registry. This is not the case here. This change is also permanent after restarting the program, which does not seem to be the case with your change in minutes.

So if I understand correctly, it only works temporarily while the program is open?


Sauf que je suis capable avec la dimension de la fille en mode petit, de voir dans l'interface graphique, le curseur se changer au delà du 60%, suite au changement dans la base de registre. Ce qui n'est pas le cas ici. Ce changement est aussi durable suite au redémarrage du programme, ce qui ne semble pas le cas avec votre changement de minutes.

Donc si je comprend bien cela fonctionne seulement de façon temporaire, pendant que le programme est ouvert ?

@BJlover Hi,
Thank you for your feedback.
Let me check with the team first.
Do not purchase it yet
Thank you

@Manue

It's been over two weeks, and I still haven't received a clear, definitive answer from the team on this topic.
Today I have the same problem with the f1923 e f1947 cards.
How do I know if the "barefoot" tag is correct?

I can't always hope that a forum member will watch the entire show and let me know if the tag is correct...
I would therefore like the tags to be accurate and relevant to the content.

I'm waiting for a response, hopefully a comprehensive one this time.

@whateverr1000

Thank you SO much!

You made my day!!

Have a great time!!!

😊

@JoKerMen Hi, Reset done : )
May I ask which email address did you send your email to ?

[email protected]

@JoKerMen

If you only need a reset then post in this thread.

https://www.istripper.com/forum/thread/28643/1?post=449733

and follow the instructions in the first post.

The thread is monitored and Moderators are able to reset installs (moderators are not able to see support e-mails but they can see Install Reset requests in that thread). Generally the moderators can respond much quicker than support for simple install resets.

Unfortunately there is no longer any support with "iStripper" and there has been no response to emails for days.
The chat bot doesn't help, real supporters are no longer available (anymore).
Account reset not possible for installation.
Pity

@CountDracula

Out of curiosity, I made the change in the registry as indicated by writing “3e8”. I restarted the program. I checked the software settings.

What is shown on screen is set by the GUI - it doesn't have a setting lower than 5 minutes so it can't show you what you set in the registry. If you move the slider it will write the new level into the registry but if you don't touch it, it should operate with the value you gave it.

It's the same method as where people have edited to allow desktop multi-girls to be > 60% scale.

I had originally posted a Random Shaders set up diagram showing the timer
(push scene change) checked. It has since been edited to unchecked

https://scenes.virtuastripper.net/SceneImages/RandomShader02.png

as it should be.. No clips are being cut short anymore unless it gets re-checked.

@EverthangForever or @Wyldanimal

How can we save the configuration of the number of seconds and the selection of subfolders in the RandomShaders.exe program, so that we don't have to reconfigure them each time we open the program? I clicked on “Save Paths”, but this has no impact on the backup of this data.

@EverthangForever ou @Wyldanimal

Comment pouvons nous sauver la configuration du nombre de secondes et la sélection des sous dossiers dans le programme RandomShaders.exe, pour ne pas a avoir à les réconfigurer à nouveau à chaque nouvelle ouverture du programme ? J'ai cliqué sur "Save Paths", mais cela n'a pas d'impact sur la sauvegarde de ces données.

Thanks for the image correction @EverthangForever.

@Calgon, Out of curiosity, I made the change in the registry as indicated by writing “3e8”. I restarted the program. I checked the software settings. It remains at “493e0” in the registry or 5 minutes minimum between scenes, with no possibility of adjusting below 5 minutes. I don't know how you did it, but the change is not made permanently in the program to give the possibility of adjusting at 1 minute, following the change in the register.


Merci pour la correction de l'image @EverthangForever.

@Calgon, Par curiosité, j'ai fait le changement dans la base de registre comme indiqué en écrivant en « 3e8 ». J'ai redémarré le programme. Je suis allé voir dans les réglages du logiciel. Cela reste à « 493e0 » dans la base de registre ou 5 minutes minimum entre les scènes, sans possibilité de réglage en bas de 5 minutes. Je ne sais pas comment vous avez fait, mais le changement ne se fait pas durablement dans le programme pour donner la possibilité d'ajuster à 1 minute, suite au changement dans le registre.

Bump on this. I would really like it if when you ***** select cards and get to the bottom of the page it scrolled down like it did on the old version. Currently it is very tedious to select more than the current page.

Any truth to this?

I had originally posted a Random Shaders set up diagram showing the timer
(push scene change) checked. It has since been edited to unchecked

https://scenes.virtuastripper.net/SceneImages/RandomShader02.png

as it should be.. No clips are being cut short anymore unless it gets re-checked.

I don't know if this is of help on this discussion as I don't use the random shaders app but if you don't like a clip getting stopped in the middle this might help . I've set my system up to have one active scene for every type of category plus a few extra ones in other themes (about 70 in all). If I press the "Play All Scenes Succesively" icon it will play all of my scenes in a random order. I'd set the "minimum delay between scenes" to 5 minutes (the minimum). Then after clips of over 5 minutes have played, the scene will fade and a new random scene start. Today I found that this 5 minute minum can be reduced further so that after the end of a scene of just one minute it will trigger the scene change at the end of the scene by editing it in the registry.

The registry key is at Computer\HKEY_CURRENT_USER\Software\Totem\vghd\parameters

I changed the value of "MinimumSceneDuration" to "3e8" which means 1 second - which I think the software rounds up to 1 minute.

There will be no more anal?

@BJlover Norah Juliette (1889): Shoes stays on in 5 clips (1 standing 4 pole clips). Shoes come off in 2 clips (1 table and 1 standing clip). And she starts with no shoes in 5 clips (3 standing and 2 table clips).

@BJlover Agatha Vega (f1905):
In all standing clips shoes stay on, in one table clip she takes the shoes off and the rest of the table clips and SE starts with no shoes.

Bonjour @ComteDracula
Oui 23 secondes est le temps qu'il faut pour douze bars de beaucoup de musique ... donc un bon endroit 😎
yes, 23 seconds is the time it takes for twelve bars of much music..so a good place

Hi @EverthangForever,

I haven't noticed this kind of pixellation on my end, nor any “freeze” when Ramdom Shaders is set to 600.0 seconds on the timer.

But as I don't trigger scene changes from the timer, there's nothing to stop me leaving it at 23.0 seconds.

Thank you for your comments. 😊


Bonjour @EverthangForever,

Je n'ai pas remarqué ce genre de pixellation de mon côté, ni de "freeze" lorsque Ramdom Shaders est réglé sur 600.0 secondes sur la minuterie.

Mais comme je ne provoque pas de changement de scène à partir de la minuterie, rien n'empêche en effet de la laisser à 23.0 secondes.

Merci pour vos observations. 😊

@Wyldanimal @mitchell

this is a bug it will be fixed in the next version of the software by devs so we will have access to 4K

see the answer here
https://discord.com/channels/709339443777110026/875304231807119380/1406930590313349131

Thanks @ComteDracula
Just some observations about using the Random Shaders app.
From time to time, some shaders appear to be highly pixilated
ie: they are being rendered at way too low resolution...
I may be wrong however I figure this is due to the shader
'inheriting' the low resolution of the underlying texture being used
by the shader. Shadertoy's web textures that they made available
are often waay below resolution of the originator's original textures.
If this bothers you, maybe try to substitute your own textures with a minimum
size of say 1920 x 1080 no less than 72 DPI and use sRGB Color Profile.
You can transform your pics' Color Proifile using GIMP.

Another observation is that setting the Random Shader app to
Time in Seconds = 600, causes a 'freeze' in what Random textures
are selected by iStripper and the shaders in the SCN code, for every scene.
I did not notice this while I had 'Time in Seconds' set to 23.

So if I understand correctly, for someone like me who wants to play all the clips on a girl's card, I have to disable the “Push Scene Change” option. The only difference with normal scene playback is that scenes change automatically and randomly at the end of the complete playback of my card, according to my settings in the iStripper program. In my case, it's not possible to change scenes within the duration of the card, without affecting the complete playback of my card.

Thanks for the information and your excellent work @EverthangForever and @Wyldanimal.


Donc si je comprend bien, pour quelqu'un comme moi qui veux lire tous les clips de la carte d'une fille. je dois désactivé l'option "Push Scene Change". La minuterie ne servant à rien, sauf à faire apparaître les scènes à venir dans le programme Random Shaders. la seule différence avec la lecture normale des scènes, et que celles-ci se changent automatiquement et aléatoirement à la fin de la lecture complète de ma carte, selon mes réglages dans le programme iStripper. Dans mon cas, aucun changement possible de scènes, en deçà de la durée de la carte, sans affecter la lecture complète de ma carte.

Merci pour les informations et votre excellent travail @EverthangForever et @Wyldanimal.

My question is: is it possible for this program to work with iStripper's clip playback structure in this way?

La question que je me pose est : est-ce possible que ce programme agisse ainsi avec la structure de lecture des clips de iStripper ?

No, the FullScreen Mode does not provide any notification of Model change or Scene change
so an External App, can not know when the Model has changed

This is why there is a timer control or manual control.

In Desktop Mode, there is Notification of the clip change
this way a 3rd Party external app, can know when a clip has ended,

But FullScreen mode does not Yet provide this Notification.

Also FullScreen Scene Mode Do not allow for the Same Model t continue performing when a new Scene is started.

The Entire Scene with a New Performance is started from the Beginning

There are technical limitations, and we use creative solutions to work around these limitations.

Non, le mode plein écran ne fournit aucune notification de changement de modèle ou de scène.
Une application externe ne peut donc pas savoir quand le modèle a changé.

C'est pourquoi il existe une commande de minuterie ou une commande manuelle.

En mode bureau, il y a une notification de changement de clip.
De cette façon, une application externe tierce peut savoir quand un clip est terminé.

Mais le mode plein écran ne fournit pas encore cette notification.

De plus, le mode scène plein écran ne permet pas au même modèle de continuer à jouer lorsqu'une nouvelle scène commence.

La scène entière avec une nouvelle performance recommence depuis le début.

Il existe des limitations techniques, et nous utilisons des solutions créatives pour contourner ces limitations.

Traduit avec DeepL.com (version gratuite)

Reina Ohara - Bubblegum Wrap - f1932 - iStripper XXX
Georgia - Maid This For You - f1947 - iStripper XXX
Avery - Lasso Me - e2099 - iStripper
Ave Deva - La Dominatrice - f1916 - iStripper XXX
Wikki - Conter Fleurette - e2091 - iStripper
Kaly - Macao's Girl - f1923 - iStripper XXX
Ashby Winter - Sweet Ashby - f1913 - iStripper XXX

Yes, it's much better if you set the timer to 600 seconds and uncheck “Push Scene Change”.

The girl plays for the duration set in the iStripper program, and at the end of her last clip, the scene changes to another girl.

However, I would have expected a different behavior with the Random Shaders program. I was expecting multiple scene changes during the reading of the girl's card.

So, still playing the girl according to the time programmed in iStripper, I would have liked the scene to change between two clips of the girl's card, according to the timer of the RandomShaders program, without affecting the smooth running of the card.

So, taking the 600-second example, the current girl's card plays clips up to around 600 seconds and a little longer, depending on the length of the clip. At the end of this clip, the scene changes, and the card starts its next clip until the end of the planned duration of this card in iStripper. In my case, all card playback.

So, for a card with a duration of around 4o minutes, set to 600 seconds, if this card is played in its entirety, there would be three scene changes during the complete playback of this card, without affecting the playback of my card. For a total of 4 scenes played.

My question is: is it possible for this program to work with iStripper's clip playback structure in this way?


Oui c'est beaucoup mieux en mettant la minuterie à 600 secondes et en décochant "Push Scene Change.

La fille joue toute la durée qui a été réglé dans le programme iStripper, et c'est à la fin de son dernier clip, que la scène change avec une autre fille.

Par contre je me serait attendu à un comportement différent avec le programme Random Shaders. Je m'attendait à des changements de scènes multiples durant la lecture de la carte de la fille.

Ainsi, toujours en jouant la fille selon la durée programmé dans iStripper, j'aurais aimé qu'entre deux clips de la carte de la fille, la scène change selon la minuterie du programme RandomShaders, et ce, sans affecté le bon déroulement de la carte.

Donc en prenant l'exemple du 600 secondes, la carte de la fille en cours joue les clips jusqu'à 600 secondes environ et un peu plus, tout dépendant de la durée du clip. À la fin de ce clip, la scène change, et la carte débute son clip suivant jusqu'à la fin de la durée prévue de cette carte dans iStripper. Dans mon cas, toutes la lecture de la carte.

Ainsi, une carte ayant une durée d'environ 4o minutes, réglé sur 600 secondes, si cette carte est jouée au complet, il y aurait trois changements de scènes pendant la lecture complète de cette carte, sans affecter la lecture de ma carte. Pour un total de 4 scènes visionnées.

La question que je me pose est : est-ce possible que ce programme agisse ainsi avec la structure de lecture des clips de iStripper ?

Stop being hot!

<(^_^)>

:o :)

👍😎

What bothers me is that when the scene changes, the girl also changes after 23 seconds.

Hmm oui c'est pourquoi j'ai recommandé de 'uncheck' la minuterie. Les clips se terminent. les scènes aussi
Avec la minuterie (changement de scène push) sans contrôle, -- le shader n'a aucune raison de terminer
Seul le clip se terminant ou la souris droite ou la 'down arrow' le bas devrait le faire se terminer.
Avec la minuterie (changement de scène push) sans checked. Essayez de régler 'Time in Seconds' à 600
S'il semble encore couper un clip trop tôt, mieux de demander à @wyldanimal
ignore C) Randomshader03a and (C) Randomshader08a Ce ne sont que des tests SCN.
~~~
hmm yes that is why I recommended uncheking the timer. Clips end, scenes need a clip.
With the timer (push scene change) unchecked, the shader has no reason to end
Only the clip ending or right mouse or push down arrow should be causing it to end..
With the timer (push scene change) unchecked try to set the 'Time in Seconds' at 600
If it still seems to be cutting off a clip too soon, we had better ask @Wyldanimal

Use your Phones Mobile web Browser
https://www.istripper.com/models
then set you browser option to display Desktop site.

Thanks @EverthangForever.

I've set Ramdom Shaders to the settings shown in the image https://scenes.virtuastripper.net/SceneImages/RandomShader02.png

Am I mistaken, or are these settings not retained in memory after this program is closed, as far as the seconds, of the “Push Scene Change” option and the selection of sub-folders are concerned?

What bothers me is that when the scene changes, the girl also changes after 23 seconds.

Is there no way for the backgrounds to change smoothly without interrupting the image and for the same girl to continue dancing?

Personally, I don't really enjoy it. I like to see the girls' full shows.

Also, I already had Random Shader scenes in my scenes. Probably a previous download? Should I also check (c)RandomShader03a and (c)RandomShader08a?

I have a program called Plane9 Windowed, which seamlessly blends different animated wallpapers, obviously without interruption on the girl, being two different programs. Is it possible that it works in much the same way, or are they two completely different models? https://www.plane9.com/


Merci @EverthangForever.

J'ai réglé Ramdom Shaders selon les paramètres indiqués dans l'image https://scenes.virtuastripper.net/SceneImages/RandomShader02.png

Est-ce que je me trompe ou ces réglages ne sont pas gardés en mémoire après la fermeture de ce programme, pour ce qui est des secondes, de l'option "Push Scene Change" et de la sélection des sous-dossiers ?

Ce qui me dérange est que lorsque la scène change, la fille change aussi après 23 secondes.

Il n'y a pas moyen que les arrières plans changent de façon fluide sans interruption de l'image et que la même fille continue à danser ?

Sinon personnellement je n'y trouve pas vraiment de plaisir. J'aime bien voir les shows complet des filles.

Aussi, j'avais déjà des scènes Random Shader dans mes scènes. Probablement un téléchargement précédent ? Dois-je aussi cocher les scènes (c)RandomShader03a et (c)RandomShader08a ?

J'ai un programme qui ne nomme Plane9 Windowed, qui mélange de façon fluide différents fonds d'écran animés, sans interruption évidemment sur la fille, étant deux programmes différents. Est ce possible que cela fonctionne un peu de la même façon ou est-ce deux modèles complètement différents ? https://www.plane9.com/

I was really disappointed that I couldn't buy any show last week because I didn't have a PC at my vacation location, only my smartphone.
I could only watch ads, but I couldn't buy shows.
Is there a way to buy cards, like when the website was accessible on smartphones, without having a mobile subscription?