An issue with the queue in the current beta version: Adding clips to the queue from the collection screen is very slow because the right click menu takes a long time to appear, but adding a clip to the queue from it's own page is noticeably quicker.

Hi @xoheadbo, would you have a video showcasing the problem you're describing please?

In general I find Version 2 interesting. But I have not been able to find the individual clip menu to select or deselect the clips to play for each card. This function was easy to use in Version 1.2.552. Where is it in the Beta version?

Never mind. I found it.

Never mind. I found it.

Right click is your Freind in version 2.0

try to right click on everything and see what you discover.....

So instead of just ***** and dropping a show into the queue I have to navigate through multiple menus to put it at the top or bottom of the queue. Then I go into the queue page and put that show where I actually want it. Why does the queue have to be the whole screen? Am I reading this right?

Exactly!!! How is this an improvement? So frustrating.

A positive point:
This version allows programmed clips to be taken into account for secondary clips in fullscreen mode.

In general I find Version 2 interesting. But I have not been able to find the individual clip menu to select or deselect the clips to play for each card. This function was easy to use in Version 1.2.552. Where is it in the Beta version?

yes i too. geht mir auch so , ich vermisse es sehr !!!!

To display the clips list, right click on a card and click on Edit clips.

When l'm searching in my collection for a girl by name l would like to have all the other applied filters disabled like they used to be in earlier versions, so l can see all her cards (disabled, deleted, hidden etc). Same goes for the store.

It's impossible for me to empty all the cards to come randomly chosen from the autoplay list.

The “empty to follow” button remains shaded and unresponsive.

If I remove a card from the to-be-followed list, another one is added randomly, out of a total of 10 cards.

I have to say I liked the old side playlist on the right of the screen better, where you could ***** and drop upcoming and playback cards more easily.


Il m'est impossible de vider toutes les cartes à venir chosi aléatoirement dans la liste à suivre de l'autoplay.

Le bouton "vider à suivre" reste ombragé et ne réagit pas.

Si j'enlève une carte dans à suivre une autre s'ajoute aléatoirement sur un total de 10 cartes.

Je dois dire que j'aimais mieux l'ancienne liste de lecture latérale à droite de l'écran, où l'on pouvait glisser er retirer plus facilement les cartes à venir et à lire.

How do I empty the AutoPlay List?
The Short Answer:
The AutoPlay list should Never be empty. There should always be 10 items on the list.

In the Prior Version
it too had an Autoplay list, Built from your Enabled cards, or from your Previews.

But it was Not Shown, on the screen. It was there but you couldn't see it, or interact with it.

In the prior version, When you Activated iStripper, a card, Seemingly at Random
was played from your Enabled cards.

Where did the card come from? It came from the Hidden Autoplay list.

Now in 2.0, we get to see and Interact with the AutoPlay list.
It's creating much *****. It's not New, but what is new, is we get to see it.

Normally, The Autoplay list should never be Empty, there should always be 10 cards on the list.
Either from you Enabled cards, or from your Previews.

How to Have an Empty AutoPlay list.

1 - In the Queue, Set the Preview Frequency to 6
2- In the Queue, Disable Previews
3 - In your Collection, use CTRL-A to Select ALL of your cards
then right click a card, select manage, then select disable.
This will Disable your Entire collection
Now there are No Enabled cards, and the AutoPlay list should be Empty.

4 - ( Optional ) This step maybe needed, but in my Tests it is Optional.
In the Store go to the Previews Page.
Use CTRL-A to Select ALL
then right click on a card, select Preview, then select Delete

Demo Video
https://wyldanimal.com/videos/How-to-empty-autopaly-and-more-about-the-queue.mp4

The Current Version is Build 2.0.1 ( 1001 )
The previous Version 2.0.0 ( 1036 )
and Version 2.0.1 ( 1000) Has been updated by Build 2.0.1 (1001)

To get the current version Visit :
https://www.istripper.com/
Download and Install it, OVERTOP
Do Not uninstall
Never Uninstall Unless a Team member or Customer Support Tells you to Uninstall
Always Install OVERTOP of your current version.

Comment vider la liste de lecture automatique ?
Réponse courte :
La liste de lecture automatique ne doit jamais être vide. Elle doit toujours contenir 10 éléments.

Dans la version précédente
il y avait aussi une liste de lecture automatique, construite à partir de vos cartes activées ou de vos aperçus.

Mais elle n'était pas affichée à l'écran. Elle était là, mais vous ne pouviez pas la voir, ni interagir avec elle.

Dans la version précédente, lorsque vous activiez iStripper, une carte, apparemment au hasard
était jouée à partir de vos cartes activées.

D'où venait cette carte ? Elle provenait de la liste Hidden Autoplay.

Maintenant, dans la version 2.0, nous avons la possibilité de voir et d'interagir avec la liste AutoPlay.
Cela crée beaucoup de *****. Ce n'est pas nouveau, mais ce qui l'est, c'est que nous pouvons la voir.

Normalement, la liste Autoplay ne devrait jamais être vide, il devrait toujours y avoir 10 cartes dans la liste.
Soit des cartes activées, soit des aperçus.

Traduit avec DeepL.com (version gratuite)

Comment avoir une liste AutoPlay vide.

1 - Dans la file d'attente, régler la fréquence de prévisualisation sur 6
2- Dans la file d'attente, désactivez les aperçus.
3 - Dans votre collection, utilisez CTRL-A pour sélectionner TOUTES vos cartes.
puis cliquez avec le bouton droit de la souris sur une carte, sélectionnez Gérer, puis Désactiver.
Cela désactivera l'ensemble de votre collection.
Maintenant, il n'y a plus de cartes activées et la liste AutoPlay devrait être vide.

4 - (Facultatif) Cette étape est peut-être nécessaire, mais dans mes tests, elle est facultative.
Dans le magasin, allez sur la page des aperçus.
Utilisez CTRL-A pour sélectionner TOUT
puis cliquez avec le bouton droit de la souris sur une carte, sélectionnez Prévisualisation, puis Supprimer.

Vidéo de démonstration
https://wyldanimal.com/videos/How-to-empty-autopaly-and-more-about-the-queue.mp4

Traduit avec DeepL.com (version gratuite)

La version actuelle est la version 2.0.1 ( 1001 )
La version précédente 2.0.0 ( 1036 )
et la version 2.0.1 ( 1000) a été mise à jour par la version 2.0.1 (1001).

Pour obtenir la version actuelle, visitez :
https://www.istripper.com/
Téléchargez et installez le, OVERTOP
Ne pas désinstaller
Ne jamais désinstaller à moins qu'un membre de l'équipe ou le support client vous dise de le faire.
Installez toujours OVERTOP de votre version actuelle.


Traduit avec DeepL.com (version gratuite)

Thanks @Wyldanimal for the detailed explanations. Very helpful. 😊

Merci @Wyldanimal pour les explications détaillées. Très utile. 😊

@Wyldanimal,

Your explanation on how to "empty' the Queue works EXCEPT if you have created multiple Playlists, have activated one of them ON THE PLAYLISTS PAGE, then stop playing that playist and want to start a DIFFERENT playlist. Even after deactivating all the first Playlist cards ON THE PLAYLIST PAGE, then activating the cards in the next Playlist, the Queue STILL keeps 10 of the cards from the first Playlist in the Queue list. Then when you start the next new loaded Playlist, those 10 cards from the previous Playlist get mixed in with them. Yes...they will "go away" after they have been played once (and get replaced by the clips from the second playist you have activated), but the only way I have found to remove those 10 cards from the previous playlist in the Queue BEFORE starting the next Playlist is I have to MANUALLY select each clip in the Queue from the fisrt playlist. Gotta do that 10 times...once for each clip from the first (or any previous) Playlist that was run. Unless I'm missing something, we need a "One-Click Clear The Queue" button ON THE QUEUE PAGE that WILL clear all previous clips in the Queue so we can run a NEW Playlist without jumping through hoops to delete all the 10 clips in the Queue from a PREVIOUS playlist.

If my above is *****, try this: Create 2 playlists for 2 different models using just her own model clips for each playlist. Then (even with your entire collection de-activated on your Collection page) load one of those model's playlists from the PLAYLIST page and play it. It will fill the Queue with 10 of her clips. Then stop that playlist and deactivate all the cards in it on the Playlist page. Then activate the OTHER model playlist and start that. There will STILL be 10 clips from the FIRST model's playlist in the QUEUE unless you manually "right-click and Remove" each one of them individually from the Queue list BEFORE starting the second model's playlist.

If I'm missing a way to remove the first playlist clips from the Queue without having to manually delete each one separately, please enlighten me.