@EvethangForever

Unfortunately my current rig isn't yet
up to it without uber jerkiness

I wouldn't wish anyone to ***** from uber jerkiness was it one model in particular that caused this condition ?

If you want to tinker... you could reduce the number of images in the set to say 10 and see if that helps or scale the images back to 4K.

What kinda rig have you got ?

Looks like the release dates are off by a day for all the coming soon cards, they're all showing their release dates as a day early in the new software

@Number6

As with anything new It takes a little time to get used to and just requires a little patience.

I think there is, and has always been, a consistent complaint that the queue system is unworkable by many people. It depends how you use iStripper of course. For myself the queue sidebar is THE most important feature as I use it whilst on the fullscreen page and also the Collection page and Clips pages. You may be able to workaround it but that ***** any enjoyment of the system.... and then I downgrade back to the old version.

Bring back ***** and drop for the queue.

***** and drop is working in the Queue, but the Queue is much harder to use now in general. Previously you could open clip list and then open the queue as sidebar and you could add clips by dnd directly to the queue.

Now you need to open clip list by right clicking the card, add clips from the list by clicking on Add to Queue and then you need to switch to Queue to reorder the list if you want, but there are no clip numbers visible in the queue, so you are blind again. This is much much less user friendly than it was in the old version. Please bring back the Queue as sidebar again and the clip list could be full screen too.

Viewing photos is also inconvenient now as you could see all photos at once previously, now you must scroll like crazy and you always see only few of the photos. Zooming should be on mouse wheel too, which is not.

Generally I am not totally disapointed with the new UI, there are things which are better now, but there is also lot of things which are much worse or less user friendly. I still like the old UI more than this one.

To display the clips list, right click on a card and click on Edit clips.

And also, how can I quickly identify and delete the potentially gigs of previews already automatically downloaded?

Can anyone confirm that this method actually prevents previews from being downloaded. Or does it simply stop the previews from being played automatically?

This is so uggly, i dont find anything !
Are you proud of your work ?

I am more and more convinced not to switch to the new version istripper 2.0.I think the new version is only tested by the team. It should have been tested by people who know nothing about the new version and are seeing it for the first time.

Incorrect

I and many other iStripper users have been testing the "new" version for several months.

I am more than happy with this latest version. I certainly wouldn't want to go back to the old version.

As with anything new It takes a little time to get used to and just requires a little patience.

"Right Click" is generally your friend in the new version

Bring back ***** and drop for the queue.

@Fischduft Hi, could you please clarify ?

Right click on a card and you will see the options : )

Click the big + button to add a playlist, then select "Import" and either Browse or *****&drop the playlist.

In general I find Version 2 interesting. But I have not been able to find the individual clip menu to select or deselect the clips to play for each card. This function was easy to use in Version 1.2.552. Where is it in the Beta version?

yes i too. geht mir auch so , ich vermisse es sehr !!!!

es ist sehr schön ,das etwas mehr Farbe ins Spiel gebracht wurde. dafür danke. mehr gutes konnte ich bisher nicht finden.

ja ich habe gesehen, und gefühlt ... nur was ich gefühlt habe möchte ich hier nicht in Worte fassen . Ich bin so entäuscht. Benutzerfreundlichkeit wurde vergessen.
Und auch nach über 10 Jahren
Istripper ist man immer noch nicht in der Lage im Forum texte zu kopieren um sie bei google zu übersetzten!!!!
folglich werden wohl einige Texte auch falsch überstetzt und dargestellt.

Und wie ein anderer user hier schreibt , friert Istripper oft ein oder hängt sich auf

yes, I saw and felt... I just don't want to put into words what I felt. I'm so disappointed. Ease of use has been forgotten.
And even after more than 10 years
Istripper is still not able to copy texts in the forum to translate them on Google!!!!

Even before this, Istripper could not access the previously saved playlists.
Now I don't even have access to the current playlist anymore... just something is playing. I'm disappointed

The new current playlist can no longer be found! the new mess is no longer user friendly

YES, where is the playlist please and the display of what is currently being shown

I am more and more convinced not to switch to the new version istripper 2.0.
I think the new version is only tested by the team.
It should have been tested by people who know nothing about the new version and are seeing it for the first time.

@Calgon this is great work. Unfortunately my current rig isn't yet
up to it without uber jerkiness , let alone adding a Meta Quest 3s 😪

Where is the list of clips ? Right click on a card in the collection tab or in the details page then click on "edit clips"

Inconvenient if you want to play all clips of a card! The old but better solution presented by Celine at https://www.istripper.com/forum/thread/41217/1.

@YankThis

Select My Playlists on the Collection Tab.

Click on the large + sign in a circle (=Create a New Playlist)

Select Import to import an existing Playlist

There is also a default "Favourite" playlist. If you "Favourite " a card it is automatically added to this Playlist

HTH

@ComteDracula

Unfortunately I'm not equipped to see 8K.

You said you had a VR headset - Have a look at the work @WA has done on Virtual Monitors - you may find you are fully equiped after all.

where is my playlist and if it is gone how do I go back to the better version?

Bonjour, petit retour sur cette version 2.0 quand je lance un clip, à la fin de celui-ci l'image ce fige et le clip ne s'arrète pas. j'ai mis l'interface en français mais tout est resté en anglais. dans la collection impossible de trier par numero de carte croissant ou décroissant. quand je delete un show, il est impossible d'activer ou de désactiver la carte.

mise a jour, c'est bon l'interface est enfin passer en français

The release date of Lilly Mays was yesterday 19 February, not on 18 February.
And Dee Vine's card will be released today, 20 February.
Normally, cards will be released at 10:00 am, Paris time

@Calgon

Thanks it worked by removing the two sections of code.

Unfortunately I'm not equipped to see 8K.


@Calgon

Merci cela a fonctionné en enlevant les deux sections de code.

Malheureusement je ne suis pas équipé pour voir du 8K.

Right click the card and click edit clips. Find the clip you want to play, click the three dots on the right-hand side, and then click start.

Hi, guys,
I'm not really sure I like this new version. Maybe I still don't get used to it. Anyway, I enjoyed more the old queueing system.
And, what happended the option to select a specific scene form a card? Where do I find the list of the scenes for every card?

Why are the new cards being released ak day after the release date?

Lily Mays release date: 2/18/25 Released on 2/19/25

Dee Vine release date: 2/19/25 Not released yet, and today is 2/19/25

What is happening?

This approach has already been bettered by @WA using a virtual monitor -:

https://discord.com/channels/709339443777110026/1340205310157262919

Love it when the user development is humming with activity like this :)

👍

Where did my play lists go? Can I rebuild them so I can watch what I want vs just what the app wants me to see?

@ComteDracula

Glad they worked for you. They will be even crispier in 8k.

I was wondering if the timer could be deactivated as a display? For me it's not very useful.

Remove the two sections of code like this:

sprite{
source: Writer, 0
source: Font, 1
size: 1920, 2160
// size: 960, 1080
pos: 10, -330, 1310
rot: 0, 0 , 0
scale: 0.55, -0.55
uniform: cycle_time, float, 40
uniform: alpha_on, float, 0.
uniform: alpha_off, 40
uniform: chapter, float, 3.
uniform: max_chapters, float, 3.
}

One is at line 698 the other at 1230

I have re-installed the previous 64bit version, reasons:
1) 2.0 incredibly unstable for me, especially working with my approx 2000 playlists
2) App is much slower to load and render UI graphics than the old version
3) Personally I find the new interface less visually appealing, cluttered, and not very intuitive (I'm sure time would cure some of this)
4) I use clip and playlists extensively to pander to my striptease preferences. The 2.0 version is way less appealing for both of these because:
a) Clip list is harder to find and less clips are displayed on screen, meaning more scrolling/searching for what is playing or what I want to select
b) Adding clips to a playlist, for me usually a new playlist, is incredibly frustrating as I need to scroll to the end of the playlist page to find the new playlist for every clip I want to add
c) I cannot find any way to sort playlists, they are alphabetical a-z. I would preder ability to sort that includes the playlist create or modify date that is available in the file details in \vghd\data\playlists subdirectory
5) I want to still be able to add clips or entire card to the playing next list at any position rather than just first or last

I tried it but went back to the old version.

In addition to what has been said, the old version allowed me to skip more easily from clip to clip, by clicking on the card again, it would jump to the next clip, and the card seemed to remember when you had not watched the full show and play it from there.
And someone correct me if I am wrong but that function appears to be gone in the new version, and I found it quite handy to jump from clip to clip without clicking on the clip itself.

If in the new version, the clip list works differently and after clicking on one clip, it plays the show from there - on the old one it just plays the show and then moves to the next card - I might reconsider and I did not try that.

The scrolling down didn't work very well for me, either. So for the moment, I'll stick with pre 2,0.

That is so good to hear, Starryk! Thank you for your your continued support!

"Play any clip you want" means that we will be able to play DOLZ cards with your player as well? Because that would really be great!

Bonjour,
Je suis sur macbook air, la nouvelle version est beaucoup trop lente pour pouvoir l'utiliser (naviguer dans les menus , et aussi les shows rame enormement)
Je suis revenue sur l'anciene version (non sans mal, car je ne connais pas trop l'univer apple)
D'autre personne on eu le même probleme ? et comment faire pour avoir une version qui ne rame pas ?
merci d'avance

A card starts to play.
Now I want to see more of this model.
I'll go to details.
Click on the name of the model on top.
Now I automatically come into the store.
It would be useful if there was also a tab collection here.
So I can see all the cards of this model that I own.

------
I found it: scroll down in details

Bonjour,
petit retour sur cette version 2.0

• quand je lance un clip, à la fin de celui-ci l'image ce fige et le clip ne s'arrète pas.
• j'ai mis l'interface en français mais tout est resté en anglais.
• dans la collection impossible de trier par numero de carte croissant ou décroissant.
• quand je delete un show, il est impossible d'activer ou de désactiver la carte.

thanks. next step a linux version please

+1

Ce serait bien car en octobre 2025 plus de support gratuit windows 10 et donc bye bye Microsoft et iStripper 😪😪😪

Thank you @Calgon for these beautiful scenes.

Although I have a VR headset, which I haven't yet tested on my new PC, I tried these on my screen in 3D, 1080p. It works very well for the depth effect with my 3D glasses.

Everything is fluid and the background images are very nice.

I was wondering if the timer could be deactivated as a display? For me it's not very useful.

Thanks you.


Merci @Calgon pour ces très belles scènes.

Malgré que j'ai un casque VR, que je n'ai pas encore testé sur mon nouveau PC. j'ai essayé celles-ci sur mon écran en 3D, 1080p. Cela fonctionne très bien pour l'effet de profondeur avec mes lunettes 3D.

Tout est fluide et les images d'arrière plan sont très belles.

Je me demandait si le minuteur peut-être désactivé en tant qu'affichage ? Pour moi c'est peu utile.

Merci.

Just uploaded my first 8K SBS scenes. Here's what you get..... :

There's 25 randomish backgrounds in 8K.

The backgrounds are read by a shader that splits the left and right eye sides of the background and sends each side to a separate framebuffer.

All of the rest of the scene on the LHS or RHS uses the exact same code but on each side the camera is offset so that you see it from a slightly different perspective and create the depth effect.

The two framebuffers are then merged into the final output.

The 25 random backgrounds appear in a random order randomly each time you run the scene and change every 30 seconds.

In the bottom left there's a timer so you can see how long you have been stuck in VR. :)

It's early days for what I'm building here, so keep those comments coming.

So here's the result of my first real foray into creating 8K backgrounds for viewing with a VR headset.

Feel free to develop further....

https://bit.ly/4i0R491

I'll add some technical commentary into the discussion group here, feel free to comment as feedback helps direct future endeavours:

https://www.istripper.com/forum/thread/27449/164

First button to the right of Queue above the music &show sliders is a choice of loop or random...yes the new version
has some bugs to fix.

Could we have the ability to reshuffle the queue? Or add cards randomly to the queue instead of just top and bottom? I don't like anything about the new queue more than the old yet.

i can't see 'all scene'
The queue is active and now playing, but the girl is not visible.
The function to display the target's name works, but the important thing does not appear.
This is what happened after updating to this version.
Should I also upload the error contents in vhjd.log?

I have updated to 2.0 and it is freezing. I need to go back to the lastest version of 1.2. Can anyone provide a link to where I can download this?

unable to enable/disable large groups at once. This causes me not to have the ability to view a particular ethnic group when desired.

the core user experience several times worse than before.

+1