Just a Bump to remind you that in Two days
this Forum become restricted to post with NO Photos

If you haven't already done so
Consider to join and become part of the iStripper Discord Server

https://www.istripper.com/forum/thread/27449/115?post=725953

Link to Join
https://discord.gg/xBfap7HwsP

Just a Bump to remind you that in Two days
this Forum become restricted to post with NO Photos

If you haven't already done so
Consider to join and become part of the iStripper Discord Server

https://www.istripper.com/forum/thread/27449/115?post=725953

Link to Join
https://discord.gg/xBfap7HwsP

@Philours, avez-vous ce problème avec cette scène également ?

Oui @ComteDracula, j'avais également ce petit problème, mais tout est réparé maintenant! Merci @EtF👍
Désolé pour la réponse tardive @CD
[quote] @Philours, do you have this problem with this scene as well? [/ quote]
Yes @ComteDracula, I also had this little problem, but everything is fixed now! Thank you @EtF👍
Sorry for the late reply @CD

Thanks @EverthangForever. Everything is ok. I even see animations in the screens of the two scenes of the red room. Whereas, those screens were black, before this latest update. 😊

Merci @EverthangForever. Tout est ok. Je vois même des animations dans les écrans des deux scènes de la chambre rouge. Alors, que ces écrans étaient noir, avant cette dernière mise à jour. 😊

Toutes nos excuses à tous. Mon mauvais. J'avais omis un dossier critique ou deux en pensant que vous les aviez déjà et appliqué le mauvais shader dans une autre scène. Des mises à jour ont été apportées au serveur.
Désolé pour ces messieurs. Da zip a beaucoup grandi en taille en conséquence.
Supprimez votre zip précédent et re-téléchargez..

Apologies to all. My Bad. I had ommited a critical folder or two thinking you had these already
and applied the wrong shader in another scene. Updates have been made to server.
Sorry about this gentlemen. Da zip has grown quite a lot in size as a consequence.
Delete your earlier zip & re-download..svp.

https://scenes.virtuastripper.net/ET_BoyC_Experiments.zip

zip size = 85.2 Mb Extract straight to ../scenes folder.
Allow merged folders and to overwrite old same name files.
Remixed to various Alan Parsons Project

A hole appears in the wall bottom right as it nears the model early in starting. And eventually simiular holes but larger in walls later. Its hard to screen capture but I'll keep trying.

Also these two scenes are always black and blue background even with the down arrow key reset.

This one is always with a black background even with reseting with the down arrow key.

Answer given. I close this one.

@ComteDracula merci. . Hourra vos photos montrent que les scènes de shader sont compilées ok sur votre plate-forme.
Votre résultat est normal. Ce n'étaient que des scènes expérimentales.
Ce sont de très vieilles scènes qui utilisent des textures aléatoires dans des répertoires ouverts pour monter le shader BoyC, de sorte qu'il y aura des occasions où l'iSPlayer sélectionne un fichier Transparency.png sampler2D qui semble alors s'afficher sans effet. Appuyez sur la touche fléchée du clavier vers le bas ou cliquez avec le bouton droit de la souris si cela se produit, pour continuer l'émission.

@ComteDracula thank you. . Hooray your pics show the shader scenes are compiling ok on your rig.
Your result is normal. These were only experimental scenes.
These are very old scenes which use random textures in open directories to mount the BoyC shader so there will be occasions when the iSPlayer selects a plain Transparency.png sampler2D file which then appears to display as no effect. Press the keyboard down arrow key or right-click mouse if this ever happens, to continue with the show.

With the scene in question, which I can't identify, because all the names seem similar, no matter if I press the down arrow or the right arrow on the keyboard, only the girls change. The background always stays black. Is it ok?

@Philours, do you have this problem with this scene too? All the others work normally.

Avec la scène en question, que je ne peux identifier, car tous les noms semblent semblable, peut-importe que j'appui sur la flèche du clavier vers le bas ou la flèche droite, seul les filles changent. L'arrière plan reste toujours noir. Est-ce ok ?

@Philours, avez-vous ce problème avec cette scène également ? Toutes les autres fonctionnent normalement.

Hooray your pics show the shader scenes are compiling ok on your rig.

Everything is fine for me too @ET, Thanks to you. And a screenshot of a scene that I particularly enjoy 👍

@ComteDracula merci. . Hourra vos photos montrent que les scènes de shader sont compilées ok sur votre plate-forme.
Votre résultat est normal. Ce n'étaient que des scènes expérimentales.
Ce sont de très vieilles scènes qui utilisent des textures aléatoires dans des répertoires ouverts pour monter le shader BoyC, de sorte qu'il y aura des occasions où l'iSPlayer sélectionne un fichier Transparency.png sampler2D qui semble alors s'afficher sans effet. Appuyez sur la touche fléchée du clavier vers le bas ou cliquez avec le bouton droit de la souris si cela se produit, pour continuer l'émission.

@ComteDracula thank you. . Hooray your pics show the shader scenes are compiling ok on your rig.
Your result is normal. These were only experimental scenes.
These are very old scenes which use random textures in open directories to mount the BoyC shader so there will be occasions when the iSPlayer selects a plain Transparency.png sampler2D file which then appears to display as no effect. Press the keyboard down arrow key or right-click mouse if this ever happens, to continue with the show.

Medusa
Purple & White Delight
f0852 - iStripper XXX

😍😍😍💰💰💰

Merci Comte! I'd say you were right, and she's got my favorite tag "Pro Dancer" too!

<click><click><click><click><click>

😀

I think it's Sofie Lilith.

Je crois que c'est Sofie Lilith.

Just got the 1000 card achievement but have no idea who that is!

But she's pretty.

@EverthangForever, there is one of your scenes from your download link above, which has a black background, both in the preview, and when I play the scene.

@EverthangForever, il y a une de vos scènes de votre lien de téléchargement plus haut, qui a un fond d'écran noir, autant dans l'apperçu, que lorsque je fait jouer la scène.

I updated and bundled up a number of scenes from ancient times which were open directory sampler2D shadered ones. Some were in two layers. They were variously called 'ElectricAvenew','Labyrinth' or some such name, with names sooo long, they did never quite fit into the fullscreen gallery name entry.
Many of these were clearly not ready to compile ubiquitously inspite of my best efforts at the time to make them so. They all used problematic BoyC shader mods. Many had 'ease' prefixes in their .scn animation curve clauses too, yikes !!
These scenes (listed below) are the ones which appeared most affected. They have been updated or
re-edited here with

shader:fragment,Shaders/AnotherTunnel_shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo1.fsh

thanks to some excellent shader repairs earlier..(cheers @WA :) hence these should all now compile too :-)

https://scenes.virtuastripper.net/ET_BoyC_Experiments.zip

zip size = 2.86 Mb Extract straight to ..scenes/ folder.
Allow merged folders and to overwrite old same name files.

Scenes affected/updated:
-----------------------------------
ELECTRICAveNew - labyDistances.scn
-----------------------
ELECTRICAveNew - shadertoyAAAdotcom_BoyC_TheCave_MsX3RH_ETModGo1_LabyrinthE_PlafTexSurfacesRemix003 - exYidincrete - Copy.scn
-------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo1_LabyrinthE_ETImagesPlafRemix003 - exYidincrete.scn
-----------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthD_PlafTexSurfaces.scn
------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthD_PlafTexSurfaces01.scn
------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthD_PlafTexSurfaces02.scn
------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthD_TexSurfacesPlaf03.scn
------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthD_TexSurfacesPlaf04.scn
-----------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthE_ETImagesPlafRemix003 - exYidincrete
-----------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthE_FractalsRemix003.scn
----------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthE_PlafTexSurfacesRemix002.scn
-------------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthE_PlafTexSurfacesRemix003 - exYidincrete.scn
-------------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2_LabyrinthE_PlafTexSurfacesRemix003.scn
-------------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2a_LabyrinthE_LunarpupRemix006 - Mirrors.scn
------------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModGo2a_LabyrinthE_LunarpupRemix006a - Mirrors.scn
-------------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModxHSS_Plaftexrot - UberTweek.scn
-------------------------------------------
ELECTRICAveNew - shadertoydotcom_BoyC_TheCave_MsX3RH_ETModxHSS_Textures - UberTweek.scn 👍

Thank you kindly, unfortunately that link didnt work straight away. However after I left the server I was able to join again with the link. Thank you for your time :)

Yes. Under 60% in Registry will reset the Small size.
For those who don't know how to make bigger models than 60% in the Small size, I post again these screenshots that are not mine:

EDIT by MOD:
the 1st Photo is Correct, The 2nd Photo is WRONG.
I have added the Corrected Information.

It is NOT expectedLargeHeightPercent
the Correct Registry Value is

expectedHeightPercent

@Nsanity Hi, please try : https://discord.gg/hPQgggkzsb

Hello All, hope your well. Apologies if this is the incorrect forum to post this. But I suddenly dont have access to discord, this worked fine a while ago, but I checked today, and unfortunately nothing. Any assistance would be appreciated. Thank you

80 to 90 works fine for most cards ..
Only if you use new and old cards like 720 and 3k together there will be a size difference in some occassions..
just try .. not working for you .. set the settings to there default ..
In most cases when you go below 60 % it will reset when you close and restart iStripper if I'm correct...

You'll find that members who've been here longer & with fuller collections, are quite satisfied(for the most part)!

The number of members who express any opinion on this matter is far too small for us to know whether or not the members "for the most part" are quite satisfed or are disatisfied.

@LezzyLover

Or use the Invitation Link which you can find on the bottom of the Website under the Keep connected Section.

https://discord.gg/3ssN3utTks

Furthermore if you still have trouble, please send a PM through the iStripper Client
to @Wyldanimal he will help you to get verified.

Please use also your iStripper Username on Discord as well.

@facebeater
NO. Besides the fact that you're way too new here to appreciate the full & glorious magnitude of iStripper! You'll find that members who've been here longer & with fuller collections, are quite satisfied(for the most part)! ✌💚😎

I never understood why we cannot have both at the same time, because I like both.

👍 😎

There are so many sites that offer masturbation scenes. But a hot erotic show with good strip tease and pole dancing is hard to find nowadays.

I never understood why we cannot have both at the same time, because I like both.

So, I would say the standard of model has not really changed - just the change in fashion in an attempt to provide something new - which often fails with me more often now than it once did.

Old dog, new tricks. ;)

have you guys noticed brazzers, bang, bffs and other pages?

I care not what happens elsewhere.

@LezzyLover69

I never received a message from the bot, although I joined before it was implemented. I no longer have access to the Discord.

If you have no access at all, I don't know how to help you. But if you have extremely limited access, where you can't see most of the channels, here is what worked for me: go to Discord, right-click on the iStripper icon on the left bar, and click Leave Server. Then come back here and click on the "We're Moving to Discord" announcement banner on the front page of the Forum.

That should take you to an invite page, where you can enter your information and the Bot should present you with a Captcha. If you do the Captcha and get a green check, but below it tells you that the verification failed, check and see if you have access anyway. It did that to me and it was lying.

How to Fit More than 2 small size clips Above 60%

set the slide to 1 Girl
reduce small size to under 60% -->try 20%
Increase the Girl count.
When all Girls are on the screen
Increase the Small Size back to it's Higher setting. ---> 60% or more.


The undesired effect is, that the Models will be Overlapping or Bunched together.
This was the MAIN reason that by Design, small size was limited to 60% or Less.

I read that the iStripper application can give errors at Small size over 60% for some users, so I will not insist on this request.

I have never experienced an Error from Small Size over 60%
While small Size at 100%, some models are too tall for the screen
So I usually have it 75% or 85%

the App is 32bit, and can only effectively use 3.5GB of Memory.
Each Girl on the screen ( no Matter the Size ) has to be fully expanded in Memory as it is played.

10 girls at 3K size was not a problem for 3.5GB of Memory.

But now with 4K size Clips.
10 Girls will exceed the 3.5GB and cause a crash.

Most of the time, I can run 5 to 6 4K cards
when I push it to more than 7, then there eventually will be Memory problems, and a crash.

a Single 4K clip can take up 500K or 600K or more of Memory while it is playing.
Most 4K clips are in the 300K to 400Krange.

But Multiply that x 10 and you are Out of Memory and a crash.

Eventually, the iStipper app will be released as a 64bit app
and there will not be a 3.5GB memory limit.

I never received a message from the bot, although I joined before it was implemented. I no longer have access to the Discord.

@Wyldanimal
I did in Registry from 60 to 80. Now I can do the Small Size at 100% and the Full size 200%.
I read that the iStripper application can give errors at Small size over 60% for some users, so I will not insist on this request.
Until now I've met no errors.
Thanks!

Try this.

https://www.istripper.com/forum/thread/45445/1?post=675322

Is there any way to activate a dark mode?

I've experimented with the Discord Widget List.
It is a Live Member list (slight delay ) with each refresh of the Frame.
It include 100 member names
But the Criteria for Which of the members are added to the List,
Has not yet been detected.

It Does use the Server Nickname as the displayed Name on the List.
So members with and without a Nickname are displayed.

It also seems that if your Name is on the List,
It will always be one of the Names Listed, based on your Status.

It seems to use a Pattern Matching algorithm
when you watch the List,
The List is in an Ascending order.
there are patterns Such as Show 3 that match 'Disc'
or Show 2 that match 'Pick'
2 that match 'za'

from what I can discern:
It is Picked from the members currently on-line
the List of members that match the established Patterns
then Sort the List in Ascending order

can i change my username for discord?

iStripper asks you to use same name here on Discord.

Added by MOD:
If your Discord Name is different from your iStripper name
You can create a Server NickName
and that should be the same as your iStripper Forum name.
Read the FAQ on Discord.

when is the last day for this forum?

Missed this perhaps?
https://www.istripper.com/forum/thread/48572/1?post=726093

can i change my username for discord?

when is the last day for this forum?

I have seen my name in the Discord list here, but not at the moment so it's not realtime.
----
Not far off though - on the list now.

@pickle1
Yes, that was my suspicion too - it is just a snapshot.
Thanks for your response.
Regards ...

No, I'm not in and never was, even when I'm on for the whole day.

It does 'cos I'm in it 😊 - it just doesn't highlight roles

That list here in the forum also never shows, trusted members, beta testers or mods.

I suspect that that is not a real-time display but is a snapshot.

It says there are 542 members online but that list does not look to be more than 100 and if you go into Discord right now the Verified member list shows 276 members online (and you are in that list).

I am currently connected to Discord.
I have just closed and re-started the iStripper GUI.
Why does my name not appear at the top of the iStripper forum in the list of members connected to discord?

@EverThangForever, @WyldAnimal
It is some time since I uploaded any scenes to this forum, and I have forgotten how to do it!
Can you plase remind me?

I have two compressed files 1) DrD_CruiseShip2.rar 246,045 kB OR 2) DrD_Cruiseship2.zip at 247,020 kB.
Are they too big? Is the naming convention OK? would you rather I used Discord? (If so, how?!). They both include PhotoShop Elements .psd files which are not strictly speaking part of the scene, but were used in creating the image and masks.

I wanted to upload the scene because it contains features other members might find useful - e.g @TheEmu 's permanent name technique, and realistic shadow technique, as well as one or two tips on using PhotoShop Elements to create masks which blend into the scene without quivering edge-effects.

Regards, ...

Thanks.
I have found what I needed (the member list) on the fron page of the Forum.
Silly of me - it was hiding in plain sight!

Greetings @JinHui and isn't Nici great. 😎