@ComteDracula merci beaucoup.
FGA002 a été corrigé dans le zip 😊
---
@ComteDracula thanks very much.
FGA002 has been corrected in the zip

The flirtatious Candice Demellza Yes Please! Absolutely Fire 🔥🔥🔥🔥 Got to Love those Hips!

Thank you so much @EverthangForever 😊

The butterflies are upside down in the scene "ET - FractalGardenA002".

For the rest everything is ok for me.


Merci beaucoup @EverthangForever 😊

Les papillons ont la tête en bas dans la scène "ET - FractalGardenA002".

Pour le reste tout est ok pout moi.

Advanced Address bar direct Search

Each DOLZ NFT card has a specific blockchain Contract Number
for the Lana lane Card g0045
this Contract is

0x1763bfe8c14f0cc3f7f462a9e19e57578f334dc3

for the Paola Hard Card g0032
this contract is

0x7906fddf30af0d1379ab7ec8feb2fb539e30196b

knowing the contract number
use this Address and add the contract number to the end of it, Plus the Number of the card you want to view.

https://opensea.io/assets/matic/CONTRACTNUMBER/NFTCARDNUMBER

Here we will put it all together:
The 1st Serial number is 1, but the Index starts at 0
so to find the 1st card put a /0 on the end of the contract number
Lana Lane g0045
https://opensea.io/assets/matic/0x1763bfe8c14f0cc3f7f462a9e19e57578f334dc3/0

and
Paola Hard g0032
https://opensea.io/assets/matic/0x7906fddf30af0d1379ab7ec8feb2fb539e30196b/0

for Lana Lane, there are 1000 Legendary Cards.
or Index Numbers 0 to 999
https://opensea.io/assets/matic/0x1763bfe8c14f0cc3f7f462a9e19e57578f334dc3/999
there are 2500 Epic Cards, and the Index numbers for these are added to the Last Index number of the Legendary cards.
So the 1st Epic card is
999 + 1 = 1000
https://opensea.io/assets/matic/0x1763bfe8c14f0cc3f7f462a9e19e57578f334dc3/1000

we know from looking at the rarity Trait that only 468 have been claimed so far.
so to directly go to Epic Card 468
it is 999 + 468 = 1467
https://opensea.io/assets/matic/0x1763bfe8c14f0cc3f7f462a9e19e57578f334dc3/1467

for Paola Hard, there are 1015 Legendary Cards.
or Index Numbers 0 to 1014
https://opensea.io/assets/matic/0x7906fddf30af0d1379ab7ec8feb2fb539e30196b/1014
there are 470 Epic Cards, and the Index numbers for these are added to the Last Index number of the Legendary cards.
So the 1st Epic card is
1014 + 1 = 1015
https://opensea.io/assets/matic/0x7906fddf30af0d1379ab7ec8feb2fb539e30196b/1015

we know from looking at the rarity Trait that only 470 have been dropped.
so to directly go to Epic Card 470
it is 1014 + 470 = 1484
https://opensea.io/assets/matic/0x7906fddf30af0d1379ab7ec8feb2fb539e30196b/1484

https://www.istripper.com/forum/thread/29408/79?post=762992

FGA001-FGA011
Eleven selected WebGL shaders remixed & converted to OpenGL
to run &/or remix on iStripper's Fullscreen OpenGL platform.
Something for the dance lovers.. Standing only clips apply
to all scenes.

https://scenes.virtuastripper.net/ET_FractalGardenA001-A011.zip

zip size = 574 Kb
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
Remixed to Toto with the help of Miss O
https://www.istripper.com/forum/thread/27449/150?post=762993

About https://OpenSea.io

the Listing for the g0045 Lana Lane NFT is here
https://opensea.io/collection/dolz-x-istripper-g0045

the Search tool is powerful, but you have to learn how to use it.

examples:
There are 1000 Legendary cards all have been claimed.
you can search for a specific card using the search string xxxx/1000 where xxxx is replaced with the card number you are searching for.
To search for Legendary card 357 you use 357/1000


There are 2500 epic cards, but only 468 of these have been claimed so far.
you can search for a specific card using the search string xxxx/2500 where xxxx is replaced with the card number you are searching for.
To search for Epic card 457 you use 457/2500

the Listing for the g0032 Paola Hard NFT is here
https://opensea.io/collection/dolz-x-istripper-g0032

the Search tool is powerful, but you have to learn how to use it.

examples:
There are 1015 Legendary cards all have been claimed.
you can search for a specific card using the search string xxxx/1015 where xxxx is replaced with the card number you are searching for.
To search for Legendary card 357 you use 357/1015


There are 470 epic cards, all of these have been claimed.
you can search for a specific card using the search string xxx/470 where xxx is replaced with the card number you are searching for.
To search for Epic card 457 you use 457/470

How do I know how many of each Rarity level there are?
visit the Cards NFT collection page
https://opensea.io/collection/dolz-x-istripper-g0045

then along the left side you will see different Traits for that collection.
click on the down arrow to expand the Rarity Traits
For each Level of Rarity, it will then show how many there currently are.

then click on the down arrow to expand the Serial number Traits.
there will be Many samples of the serial Number such as 1/1000 and 10/2500
this is where you find out how to type in a search for a specific card.
use the same format as you see in this list.

Mia Sun

@sxmn

only the Free NFT for Linking your iStripper account to your polygon Wallet, is Manually Air Dropped.

If you purchase a DOLZ NFT from the Market on OpenSea.io
the transfer to your Wallet is done automatically via the Blockchain transaction.

Also Note,
the Purchase of a DOLZ NFT card on OpenSea.io
is done with ETH tokens or MATIC tokens.
Which one depends on the Listing.
The Seller determines the Payment Token.

DOLZ tokens are NOT used on the opensea.io market.

I'll also make this Note:
it may be possible to Barter with the Seller, to accept some other exchange out side of OpenSea.io
NFT's can be freely transferred for No Payment from one Member to another.
They can be gifted.
So if you and another member make an Agreement outside of opensea.io
then the NFT card can be gifted instead of Sold.
This is just a transfer of Ownership via the Blockchain.
The Member sending the NFT, still has to pay a GAS fee to complete the transaction.
the GAS fees on the Polygon mainnet are currently very low compared to the Ethereum mainnet ( pennies, compare to Dollars )

Be a good boy, otherwise Candice Demellza......

https://www.istripper.com/vr180/detail/515d1f3629421900

Email us if you still can't see them even when you use the search box : [email protected]

@Romla Check the filters menus in 'My Collection' . Everything has to be selected + in the software' settings

Those cards that shall not be named, i presume.

Thank God for that. I was very upset about that, especially as one card is one of my all-time favourites

@pickle1 thanx for thr info , but i would also ask if i bought another card through dolz.io will it also be added manually on Mondays?

Which missing cards? If you mean those removed and missing due to a bug, then I do not see them in my collection yet.

💖😍The missing cards are back in your 'My Collection'! 😍💖

If it is Hilary C and bare feet you are looking for, then my recommendation is "I Won The Blue Ribbon" which has her barefoot from start to finish.

If you like Hilary C, then you should look at Marilyn. Very similar.... and more cards to purchase!!!

Niemra, Kristina Yelena, Ashley Robbins, Angel Kiss, Avery, Tania R, Aria Giovanni Angie Line, Zuzana, mila Azul have some faint tan lines

I bought/got all the "free" packs until the last 5 free cards reward due to... not enough cards eligible in the store to build the set... will the promo last a bit longer so that I can get this last 5 cards ? 😪

And so it begins.

😉

l0l!! 😄😄
btw, i am freaking loving her card!!😍

You can't go wrong with Hilary!

I really like the _itxx_ clips
I have many Playlists, so that I can just watch them.

and when combined with my iStage app, I can place them anywhere on my Screen.

It beats me why they did not film the whole model anyway. They paid for that.
Perhaps they could have dynamically altered the model's 'hotspot' or somethang
using your idea of a inout3K permission. Oh, we'll never know..😪

but it would be nice to disable transition clips entirely

There is an enabled/disabled flag in the models.lst file. The iStripper app can set and reset it for regular clips, but not for transitions. My Playlist Generator that set it for transition clips, but I've never tested to see if the iStripper App ignores that flag when selecting a transition clip.

I've never understood why Totem swapped out the use of in/out to suit a desktop novelty

Imho it is a great shame that as a consequence of Totem abandoning & relacing the original use of inout that many older clips now never see light of day in peoples' fullscreen. Still looking for a possible coding solution to this dilema which does not require unchecking inout clips on every card.

😰Its only been going on for 7 years now. Somehow I don't think it will ever be fixed.😰

https://www.istripper.com/forum/thread/32442/1?post=494409

And so it begins.

😉

I've never understood why Totem swapped out the use of in/out to suit a desktop novelty

So ,as I see it, @Wyldanimal 's previous post only applies to desktop use, not fullscreen.

re inout...But the use of it with the Behind the table was ended, and it is now Only used when the model
enters or Exits the stage from the side of the screen

my understanding is that in/out currently produced only applies to a model who has been filmed half hidden by a green screen & this is exclusively intended for desktop users.
This may have caused many models to appear in members' fullscreen with their right or left side missing.

In all the FractalGarden conversion scenes posted I have denied inout

clip {
id: Clip
deny: top, inout
}

to avoid half only models appearing because for me, if they appear, it spoils the whole show.

Imho it is a great shame that as a consequence of Totem abandoning & relacing the original use of inout that many older clips now never see light of day in peoples' fullscreen. Still looking for a possible coding solution to this dilema which does not require unchecking inout clips on every card.

To be absolutely blunt, the two cards you are considering have no bare feet and no pole dance moves at all.

So - to choose between them as they fail to meet your stated criteria - toss a coin.

Yeah, I tossed a coin and ended up getting restless nights. Although it does not have much pole dancing, her sensual moves make up for a lot of it. I am loving it !! 😄

Choose one, you will buy the rest later anyways.

😄😆

Some older series 'a' cards have clips
incorrectly coded as in/out clips Value 64

These are type 2 clips, Behind the taskbar
where at the start of the clip, the model hid behind the table, and then Popped up and possible climbed up on to the table.
at the end of the clip, the Model may have climbed off the table and hid behind it.

They were given the in/out code 64,
Because at that time
the code was used anytime the Model Entered or Exited the stage view.
either from the side of the stage, or from behind the table.

But the use of it with the Behind the table was ended, and it is now Only used when the model
enters or Exits the stage from the side of the screen

any Clip with a value of 64 as part of it's clipname
will Ignore the Established Entrance Spot, and start from the edge of the screen.

Entrance Spots:

If none exist, then a New one is calculated for the clip,
The largest Width available for the clip, is divided in Half, and the entrance is placed at that midpoint.
for All clips except Top of Screen, this entrance spot is remembered and used for the Next clip when it enters the screen.

Each Girl has it's own Remembered Entrance spot.
So if you Have it set to 5 girls, 5 entrance spots will be created and Remembered.

How to Change an Entrance spot.

using the Mouse you can Pickup and Move a girl by holding down the Mouse.
when you release the mouse, the girl will fall and land on a new location,
this creates a New Entrance spot for that girl, and it is remembered for the Next Girl.
( if the girl was too low, and falls off the bottom of the screen, No New Entrance is created, the old one remains remembered )

Girls Bunch up near the middle of the screen
When an In/Out clips starts, it is placed at the edge of the Screen, In many in/out clips, the Girls then walks towards the middle of the screen.
Playing Multiple In/out clips at the same time, results in the girls, bunching up near the middle of the screen.
If you then try to ***** and Drop them to create new entrances, any New in/out clips will again ignore this new entrance, start at the edge of the screen, and walk towards the Middle.
the Bunching up seems to be endless, because there are 1000's of in/out type clips.

@pickel1 is correct; you should go with Sheer Beauty. And yes, you will end up getting them all anyway.

Choose one, you will buy the rest later anyways.

Try this one:
e1555_38921404.vghd

what type of clip is it?

The next couple of posts are a bit off topic, But good information to know.

changing a clip name:
Example:
BehindTaskbar clips carry a value of 2
FrontTaskbar clips carry a value of 1

So take this clip name as an example
e1555_6153101.vghd

the last 3 digits are the Level, and 2 digit code, 101
remove them and you are left with 6153
that is the type of clip this is.
it can be Linked at the start which is value 4096
it can be linked at the end which is value 2048
it was filmed in Full Frame which is value 8
it is BehindTaskbar which is value 1

add them all up and you get 6153

to Make it a FrontTaskbar clip,
subtract 1 to remove the BehindTaskbar Value
add 2 to add the Fronttaskbar value

the result is 6154
add back the 3 digits 101
e1555_6154101.vghd

What are the codes?
65536 - glass
32768 - starts Nude
16384 - spin at end
8192 - spin at start
4096 - linked at start
2048 - linked at end
1024 - top of screen / Swing
512 - cage
256 - not used
128 - not used
64 - In/out (ignore entrance spot and start at screen edge )
32 - includes an Accessory
16 - holds a Sign ( buy me )
8 - filmed in Full Frame ( older clips did not film the full legs in front of the task bar )
4 - Pole
2 - behind taskbar
1- front of taskbar
0 - standing

How to Decode a clip number?
Take off the last 3 digits of the clip name.

Now, find the Largest Number in the list above than can be subtracted from the remaining number
The Clip has that Feature.
subtracted it. and Now you have the Remainder.

Repeat the above step, till you can't subtract anything else.

you now have a list of all of that clips features.

I think the problem is with the clip. She starts behind the table, sits on it and puts her legs in front.

you can Rename the clips, so they are just FrontTable, and then would not be allowed.

What are the clips names causing the Issue.

( after you rename them you will have to Rebuild Collection
so they are re-inventoried with the new names. )

I ***** the walking left to right or right to left clips. The girls always run off screen and a new show starts.
That's why I prefer watching shows in maxed mode, no transition clips at all, just the show.
I also deactivated the hanging clips, models are easier to reorganize on my screen.

I would like to second this. Certain models don't return to their start position in the it01 clips so they end up moving the show all over the screen or walking off edge of the screen. I don't have an opinion on whether or not to include those clips in new shows but it would be nice to disable transition clips entirely, or at least be able to selectively disable them in the clip list.

@TheEmu

I think the problem is with the clip. She starts behind the table, sits on it and puts her legs in front.

To be absolutely blunt, the two cards you are considering have no bare feet and no pole dance moves at all.

So - to choose between them as they fail to meet your stated criteria - toss a coin.

@Calgon

All you should need is

clip {
id: BackGirl
allow: behindtable
}

and I have several scenes using exactly that, but what you had in your second post ought to have worked. The first version was equivalent to

clip {
id: BackGirl
deny: fronttable
allow: behindtable, fronttable
}

which is ambiguous and I don't know whether the allow or the deny would "win".

I think it's just:

clip {
id: BackGirl
allow: behindtable
}

Smith2 's Ambassade as a similar thing.

clip {
id: BackGirl
deny: fronttable
allow: behindtable
}

Doesn't work either. ....

Table = both types of table clips
So allow table allows both.

This set seems to have some clips that are both behindtable and fronttable. If I want to just show solely behindtable in my scn file I tried using the code:

clip {
id: BackGirl
deny: fronttable
allow: table
}

...but it doesn't stop these dual table types showing.

Is this a fault with the flagging of the scenes or my code ?

All A's dont have barefeet clips. dunno about the rest.

@Hanger9 - without even looking at the shows, checking the tags on both the shows you refer to, there is no "bare feet" in them.

Assuming that tag is accurate, then both shows fail to meet your criteria "lot of bare feet".

For bare feet you would be better looking at "Sheer Beauty" as she is bare foot throughout the entire show.

Maybe i stressed a little too much on barefeet, but generally these are just the two cards that i am considering. A well balanced card between these two would do the trick. (Excluding barefeet)

@Hanger9 - without even looking at the shows, checking the tags on both the shows you refer to, there is no "bare feet" in them.

Assuming that tag is accurate, then both shows fail to meet your criteria "lot of bare feet".

For bare feet you would be better looking at "Sheer Beauty" as she is bare foot throughout the entire show.

This being my first Hilary C card and from what i've seen from her collection (Previews i mean), I will have to choose one between "Restless nights" and "Straight A's". I prefer more teasing, sesual moves and a quite a lot of skilled pole dancing moves combined with a lot of barefeet and taskbar clips. I am not going to read through every single review for those cards but instead I thought maybe ask the die hard Hilary C fans to help me out on this! Help me choose guys!! 😄

Tatiana Coco in her take 2 cards has a very noticable tan line on her waist.

The last day has come.
All the best for Alba da Silva!