Back to the normal version for now.
As feedback for the Beta:
1. I like more to have Menù an options all on the top of screen
2. Previews with flash sale value is less visible in the new version

Seriously, we need BACK the ability to use a slider to size the model cards in My Collection

Either the slider or a way of directly entering the number of cards we want in each row. The advantage of allowing the number of cards to be entered is that there then no need for an upper limit as there would be with a slider.

When the implementation of a control imposes arbitrary limits no matter what you set as as a "sensible" limits someone will almost certainly have a legitimate reason to want to exceed them - for example I can imagine someone with an ultra wide very high resolution monitor wanting to have a couple of dozen cards in each line while someone with poor sight using a vertical monitor may prefer just two cards per line.

As examples from my own experience of being frustrated by arbitrary limits I have at times chosen to print documents with a font size of 5 points, have viewed documents with a single pixel sized characters only to find that some programs won't allow such small sizes, and I have tried to plot 50 signals on a single graph only to be prevented in doing so because the plotting program was limited to 5 at a time. When I run up against such limits I find the normal explanation is "we never thought that people would want to do that" - I have even had that response when the requirements explicity stated that there should be no such limits (which I know was the case with the plotting program because I had written the original spec).

Seriously, we need BACK the ability to use a slider to size the model cards in My Collection

"I have a dream !"
"Yes we can !"
😎

@JonC001

I was using the same settings before the beta version, but it was working.

Seriously, we need BACK the ability to use a slider to size the model cards in My Collection

Yes, we do!

@arieshorn
I am not using this version (cannot), so it may be different.
But there is a setting for this.
Go to settings and make sure advanced settings is checked.
Then, scroll down to 'safe for work' and find 'start disabled'.
Put a check mark there.
(also remove the check mark from 'run istripper at startup' if you prefer to start it manually)

When the Windows opens, the program appears on the screen. I just want the program to launch in the system tray.

(Feedback submitted, but posting here also)

Seriously, we need BACK the ability to use a slider to size the model cards in My Collection. Why? Not all of use are using laptop size screens. I use a 65" 4K UHD TV for iStripper, and the only 2 icons available to me now are "small" and "large". Really? The "small" one puts NINETEEN model cards across my 65" monitor in My Collection. It is absolutely IMPOSSIBLE to read any of the print on them unless my nose is almost pressed up against my TV screen. The "large" icon puts FOURTEEN model cards across my 65" monitor. I would STILL have to move my recliner no farther than 6 feet away from my TV screen to read the print on the model cards. In the past I could use the "slider" to make the cards large enough so only TEN of them would be placed in each row, and they were readable from a reasonable distance that didn't ***** me to move so close to my TV I would need to rearrange my furniture to use iStripper on my TV.

Yes...some of us are old farts and our eyesight isn't as good as it was when we were spring chickens. And we can afford large screen TV's instead of laptops. PLEASE give us the My Collection SLIDER back for sizing the model cards displayed...AND make sure the "LARGE END" of the slider setting will make the cards MUCH BIGGER than what the "large" size is now.

As an aside, the new "Feature" opening screen puts SIXTEEN model cards across my screen in all the different categories shown. The cards are even SMALLER there. It provides a totally unreadly "preview" of any of those cards too on my large screen TV.

@TheEmu Not really. I both did and did not get the tag from new cards bought directly from the App store. Although the app store seems to have "issues" at the moment, so that's not too surprising. I did not get it on one new card bought via the web store.

I was able to give feedback for this beta using the link in the newsletter. 👍 😎 (Small yay 😄)

I did that too. In that feedback survey they asked to list any bugs we might have encountered with the beta, and I forgot to mention how the feedback link in the beta is not working 😆 The irony...

@Alkasyn

See if this works for you: https://www.istripper.com/forum/thread/43070/1?post=641768I have same issue of you, not only onbeta but even on ordinary version of app; I always manage to solve it, though, by using such workaround by @Wyldanimal .

Thanks for reminding me of that - I guess I fixed it so long and it never came back, but the new version must be overridingt hose settings?

I was able to give feedback for this beta using the link in the newsletter. 👍 😎 (Small yay 😄)

@Bitwrangler

Is there any pattern to what gets the New flag and what does not get it ?

For example, are those that get the flag all new releases while those that don't are older ones ?

My suspicion, though it's only a guess, is that the flag may be getting set according to the release date, which would be appropriate in the store, rather than the download date which is appropriate for My Collection.

I am getting the "new" flag about 50% of the time on my newly purchased cards and when I do the cards do indeed go to the top of my collection. The other new cards sneak into the collection in the normal sorted order and do not have the flag.

@JonC001

No problem. 😎

The "new" flag shows for me if no filters, with my usual filters is just has the new flag over "filtered cards". I think this is how it's supposed to work though.

@Socialhazard
Thanks for responding.

I wonder if that will ever be a possibility. 😕

Is it possible (in this beta version) to delete private messages without opening (reading) them?

Nope.

The Help section of the software must be updated. The screenshots are showing an old GUI for years now.

The flag "New" is missing on the new cards downloaded, before opening them by clicking on the card in My Collection tab. I would like to see it again.

I haven't bought any cards recently but the first post in this thread announcing the beta version says

new cards in store & collection now always appear at top with a NEW sticker

so according to that you should be seeing it.

Personally, my collection is normally sorted by descending order of purchase which makes the New sticker almost redundant. I also found that the New sticker was cleared far too easily for my taste, I would have much preferred it to stay on a card until I had first played it - I work round this by maintaining a New Downloads playlist.

Is it possible (in this beta version) to delete private messages without opening (reading) them?

No message indicator thingie (red dot) next to my avatar when I have a message.

I confirm, this red dot to see if a new PM is there must come back.

The flag "New" is missing on the new cards downloaded, before opening them by clicking on the card in My Collection tab. I would like to see it again.

Still nothing major but some ***** issues:

No message indicator thingie (red dot) next to my avatar when I have a message.

Scrolling the results of a Fansign is a bit slow.

@PSEUDO6ISME

I think the crashpad handler still works, the only report I can see when looking on my machine was last year though. 😕 I'm not sure because I reverted back to .360 a couple of times including just this morning, which caused it to hang in "not responding" but I didn't wait and just shut the app down and restarted it. So even if it was trying to send a report it would still have been for the .360 version.😳 😄

I really miss the carousel. I downloaded the beta and it is overall very good, but i really liked that feature and if there is an option to have it back i would very much like that.

It's due to the last survey, probably not enough people might be interested with this beautiful feature. For me it's like a store without showcase, iStripper will become a warehouse with shelves behind a counter.

I really miss the carousel. I downloaded the beta and it is overall very good, but i really liked that feature and if there is an option to have it back i would very much like that.

Hi all,

For the ones who got a duplicate charge, please send an email to [email protected] . Thank you
Please revert to the official version when you purchase a show to avoid this issue. Thank you

Thank God It's Friday! The week has been hectic with the release of our beta 1.2.510 and of course, the amazing shows that reached your taskbar:

New desktop shows:

• My favorite show of Selva Lapiedra, named "90's Young Heart"
• Marina Gold put all her enthusiasm to fitness in "Skip To The Beat"
• Madelina all in a hot shiny red dress for "Latex Fire"
• First release of Sirena Milano in a lovely Girl Next Door outfit in "Coffee And Tan"
• Super intense performance of Lilly Bella in "Crossed And Chained"
• Stunning Mara Blake, goddess in "Guardian Of Passion"
• Return of the soooo perfect Lana Lane all in simplicity for "Formally Barefoot"

New mobile shows :

• Neesa delicious in a pastry chef costume
• Mara Blake and her famous "Cum to the matrix" cosplay
• Sharon White here to nurse you!

New VR 180 video :

The royal Selva Lapiedra: https://www.istripper.com/vr180/detail/da89ced90aa3a0da


New duo of promo games:

A new duo of promo for you to enjoy and quickly reach the Special Event Card of Sirena Milano who's waiting for you in your experience bar: The wheel of bargains & the Golden Ticket



WHEEL OF BARGAINS

Spin for 1 credit and get one of the following discounts on the 4 cards drawn:
10%, 20%, 35%, 50%, 70% or 100% (FREE)!
The cards are selected among the most recent ones not in your collection and released more than 45 days ago.
Press "add to collection" to buy these shows with the drawn discount or press Spin for a new draw.


THE GOLDEN TICKET:

Scratch the 5 boxes to discover your prize :
You can win : 50, 200, 500 credits, 3 to 5 cards and a Joker Card.

Enjoy!

@Number6

Same thing happened to me late on Wednesday. Just a blank page where the Forum was supposed to be. Yesterday it was working ok and now too.

Not sure if this is the Beta or something else.I cannot access the Forum in the App (am posting this on the website).I just have a completely blank page.

Its back again.

I went to profile and clicked on one of my posts and the forum in the app now seems to be working.

Not sure if this is the Beta or something else.

I cannot access the Forum in the App (am posting this on the website).

I just have a completely blank page.

I've been away for awhile. I just got back. When I reactivated iStripper everything came back, my usual 6 desktop dancers, and so far no fan or other unusual activity, although iStripper is taking up 23% of the 28% or so of the CPU usuage.

I'll post again if anything unusual happens again.

@RonaldBIs this with the girls playing, or not?I mean, does it happen when istripper is turned off (on/off button top far right)?

It only happens with the girls playing. If I turn them off everything calms down. This has only happened starting tonight. I'd had the new version for a day or two before this.

@RonaldB
Is this with the girls playing, or not?
I mean, does it happen when istripper is turned off (on/off button top far right)?

I've been using this new version for a few days now. This evening my PC's fan started running high speed, which it has not done in my recent memory, if not ever. I brought up Task Manager and found that iStripper was taking up 16% of the CPU. Nothing else came close. I closed out iStripper and everything quieted down. Then I restarted iStripper couple of more times and it all happened again until I disabled or quit iStripper.

Anybody else had this happen?

Is 50 credits how much you spent to play, or is the the net amount after losses?

Sirena Milano
Cherry Blossom Time_f1305
added via Pleasure Chest Game
plus 2 Gift Cards for 50 credits on balance.
Pretty Fair Lucky Play ! 😀 👌

@Bitwrangler,
Bummer that I am not at all attracted to this model. So I am not buying her cards.

One File, for all the different needs. Just change the name.

Not if it can mean issues for typical users.

Selva Lapiedra's upcoming card Ipanema's Sunlight apparently has a glass clip, so there's hope!

Seems like a command-line option would be more appropriate.

if you vist a partner web site and download the app,
how then would you know to use a command line switch to install their versions.

A single Installation file, just by using the file name, can install multiple client versions and multiple affiliate versions.

versions with filenames like this one
setup-istripper_rgD9HID5M70GtKqfKlo6SACB

have a specific purpose.
It's coded like that for a reason.

Maybe to give 25 credits along with the installation, or to include the 1st card with the installation.

So by Using the filename, it makes the installer very powerful.

One File, for all the different needs.
Just change the name.

I deleted all my cards and have been downloading them and deleteing the clips I dont want lately. I downloaded the beta and continued to do what I have been doing. I downloaded all sonya blazes cards and disabled the clips I did not want on the first card and Istripper crashes (not surprized at all it crashed...) anyways now all her cards show as not downloaded when I know they are. So here is a bug report for you. youre welcome 😆.

I wpould like to mention youre update with the crash reporter also. you know that update around a year ago... Is it working?

@WyldanimalDoes the file renaming problem for the set up file only occur if you puy a hyphen (-) in the name?.

I think I answered my own question. I checked the WhiteLabel registry key and it is blank.😊

I have always named the installation file like this:

setup-istripper 12376

The current version wants (defaults) to be saved as this:

setup-istripper_5M70GqfKlo6SACBrgD9HIDtK

This came from the website just a minute ago.

I have never had a problem with the installation.
I checked the registry hours ago and found the registry value to be blank (nothing there).

edit:
I always save the installation file with the version number minus the periods/dots added to the name but never a hyphen/dash.

@Wyldanimal

Does the file renaming problem for the set up file only occur if you puy a hyphen (-) in the name?

I always save the files with the the beta or full version name and install them from the renamed file. I tend to only use underscores for the file name.

For example for the the current beta release I saved it as "setup-istripper_Beta_1_2_510.exe".

I have always done this so I can easily keep track of versions in case I ever need to revert to an older version.

I've previously not noticed any problems using this method of renamimng and installing.

Good work!!!!

Just sounds like poor software practice to have a different installation based on setup file naming differences. Seems like a command-line option would be more appropriate.

I deleted all my cards and have been downloading them and deleteing the clips I dont want lately. I downloaded the beta and continued to do what I have been doing. I downloaded all sonya blazes cards and disabled the clips I did not want on the first card and Istripper crashes (not surprized at all it crashed...) anyways now all her cards show as not downloaded when I know they are. So here is a bug report for you. youre welcome 😆.

I mentioned about this at discord about four hours ago (general channel).
I was a little late getting up, and only bought the new card of today just minutes before that.

I am surprised for there to be two cards of one girl on consecutive days.

(two cards here; the other one will show when it again becomes available)

And if you update your software within Settings page (as most surely do with finished software versions), you don't have to worry about such a thing.

well yes you would still keep the issue.
Updates from within the setting page, would apply that same registry value to the update.

Let's say you had a legitimate Partner copy of the app.
when you update using the settings, it will keep that Partners graphics.

Freeones is an example:
https://www.istripper.com/customdata/forum/2021-02-26/B2yUnJlr.png

so you would want the partner graphics to still be there after an update.

From having QA'd this show, I agree. A lovely girl with a ponytail (a weakness of mine 😍) and a kimono that resolutely refuses to stay closed and covering her 😛

You will enjoy