Aria Star - Who Needs Dusting ? - e1893 - iStripper
Samantha Cruuz - Morpho Menelaus - f1333 - iStripper XXX
Bella Angel - La Douceur D'un Ange - e1896 - iStripper
Lisa Belys - Hot Black Stripes - f1351 - iStripper XXX
Azelia - Simply Delicious - e1909 - iStripper
Kama Oxi - These Boots Are Not For Walking - f1343 - iStripper XXX
Sandra Lyd - Fresh From the Beach - e1907 - iStripper

@Calgon Brilliant! I would personally volunteer to become the table surface myself. Just put me in a custom green screen box or throw a cloth over me with a hole cut out of it. The girls can bounce as hard as they want and I will gladly absorb all of the ***** and punishment those hardwood floors can dish out. Ahh if only to make such a sacrifice..Joking aside that is interesting and I wouldn't have thought of that and didn't notice that over those years. Thanks @Orclover now I can't even ***** about that anymore :) I didn't say it before @abworkout but I hoped that my picks helped you out either way.

From the post by @Voluntas, this is the paragraph that I would like to discuss.

Don't get me wrong here though. I have nothing against exclusive content and paying a good sum for exquisite stuff, but it should be accessible for the entire active market not just a handful cryptocurrency warlords who probably have practised crypto-manipulations at nano-dimensions for years and can now monopolize on all the NFT benefits

Until the start of Season 1, I personally had never been near any crypto-currency. But I wanted to be able to buy some of the NFTs so I set up a Metamask wallet and used Transak to convert $50 (from my bank account, the transfer of which I initiated) into Matics and then worked within my Metamask wallet to convert those Matics into Dolz.

Since then I have bought (in the auctions) a limited edition version of each card offered. I have just used Transak again to add a further$20 into my Metamask wallet.

So it is not really that different to using a credit card via one of our payment service providers (Epoch) to convert $50 money into 500 credits which we have been using to buy cards for years.

I am a collector, not an investor. And I think I am representative of a lot of members who are doing the same as me. I doubt I will ever re-sell them - but at least that option is available to me. 😊

Thanks, guys. I just decided to download 530 and install over my latest upgrade. It fixed the problem. But thanks for the d/l link, Wyldanimal. I 'll d/l it and keep it handy in case this ever happens again.

I get not liking the tone of the comments but I'm not sure how you you call it mis-information?

" how the secodary market has already spiralled out of control"

I have no idea what it means for the secondary market to spiral out of control means but that sounds like an opinion. If it has basis or not I haven't a clue. I'm very curious how the secondary market is doing but haven't been able to find any details.

"these nasty little games are only designed for crypto exchange pump-and-dump manipulations."

I mean .. pumping and dumping is pretty much how I see this as well. Create a fake currency .. get investors to buy in with promises of future profits selling a limited availability product to an established customer base and try and convince those buyers that not only do you get this hard to buy product they can sell it for "3 times the profit" later.

I'm not saying it's illegal or even immoral and if you don't mind the process and want the show at the price available then good for those members who get them. But I'm confident some investors are gonna be left holding the bag. I'm talking to 2 different artist about the possibility of developing a NFT collection. Both are leery as their are not technical; in my discussions I've never called it a pump and dump ... instead I tell them "it's money for nothing and your chicks for free"

"Plus, this whole dolz system is just too damn complicated"

DOLZ & crypto ain't simple by any definition.

"I have neither the time nor the energy to manage hundreds of stupid online accounts."

I don't know how much time or energy the OP has but you do need at least a few of accounts to fully participate:

At a minimum you need a cypto wallet, Istripper account, and OpenSea accounts. Then you have to manage the transactions that go something like: real money to Eth to polygon to dolz (and Matic? somewhere?)

Then you have to link all these accounts together - no clue how that works but I assume: wallet to Dolz, Dolz to Opensea? Istripper to Dolz?

You may not agree with the OP arguments (or mine) but mis-information is saying that the DOLZ system isn't complicated. And while its fine to say members have tripled their money in the after market saying or even implying that future buyers will do the same is not OK.

Thanks !!!.Great info, much appreciated!

@Voluntas

Most everything you posted is 100% misinformation

You have obviously not done any research in to the DOLZ metaverse

PLESE stop spreading Misinformation

Misinformation:

" how the secodary market has already spiralled out of control"

Misinformation:

"these nasty little games are only designed for crypto exchange pump-and-dump manipulations."

Misinformation:

"Plus, this whole dolz system is just too damn complicated"

Misinformation:

"I have neither the time nor the energy to manage hundreds of stupid online accounts."

@boan000

I have a copy of the default skins
you can download from here
copy it to your data folder
Unzip it from in your data folder

https://virtuastripper.net/files/skin/iStripper-skins.zip

it contains the following skins
basic
Halloween 2016
Harley XX
melena
Sybil

@orclover

I suggested they use a prop like book or mirror to stick the toy to

I personally volunteer to hold the toy steady for them.

@boan000 - I'm afraid the bad news is the problem looks to be at your end.

I saw your post, I am running 1.2.530 in 64 bit and I have successfully swapped to the Harley skin.

You are having a rough time of this 😰I wish I had the technical expertise to help you.

Haha good luck to you. This has been tried and failed for years. Many missed opportunities and girl after girl fail at this mostly because the toy can't stick to whatever surface they are using. I personally don't like toy clips but I make exceptions for a nicely done bouncing toy ride especially depending on the woman doing it. These numbers are the only ones in the last several years that are good or at least the best attempts..(remember to put the letter f in front of them when searching I didn't include names..843, 871, 874, 952, 974, 1141, 1186/87. 1317, and pretty much any Marina Gold show (I included a name after all.)

Totem used to use a harder floor surface but girls were getting ***** and were uncomfortable in table clips and it affected the show quality because they wouldn't move around on their knees. 2015-2016 has shows where the toy does stick normally but you will also noticed girls like Nekane have ***** all over their legs from the table. And other girls from that time just refused to move on the floor. So I believe they began using a different surface and the table shows have gotten much better in terms of girl movement but the toys do not work as well. I suggested they use a prop like book or mirror to stick the toy to and that suggestions was passed on to team.

Tbh, this whole NFT thing reminds me too much of the Magic The Gathering and similar TCG madness, which is why I utterly abhor it and will avoid it like the plague. Just taking a look at the various card offers on OpenSea will make you realize how the secodary market has already spiralled out of control, as is typical for these kinds of collectibles. Like other posters have already pointed out correctly, these nasty little games are only designed for crypto exchange pump-and-dump manipulations. Plus, this whole dolz system is just too damn complicated and I have neither the time nor the energy to manage hundreds of stupid online accounts.

Don't get me wrong here though. I have nothing against exclusive content and paying a good sum for exquisite stuff, but it should be accessible for the entire active market not just a handful cryptocurrency warlords who probably have practised crypto-manipulations at nano-dimensions for years and can now monopolize on all the NFT benefits.

Make the trading cards purchasable for all customers in the right mood and with real money! Common rarity cards at least should be on offer in the regular store as well, if totem is indeed willing to give every user the chance to obtain some of them. Also, I need to see a preview or a couple shots first before I buy a pig in a poke.

Updated to 1.2.530/64 bits /Qt5.15.13 , still randomly and silently crashing,,,😟

To remove all demo files at once, you can use this tool:

https://www.isworkshop.eu/index.php?p=remover

Manual:
https://www.isworkshop.eu/index.php?p=remover_what

So, are none of the skins available for 1.2.530? Or is the ***** of available skins maybe related to the failed rebuild that ***** a reformat of my drive that had the data folder on it? I used to like to use the Harley XX skin. Is there a link to download the stock skins, or are they temporarily disabled? There does seem to be some subdirectories missing in the data folder; I only have a cache folder, musics, scenes and an update folder. I thought synching with the server redownloaded missing program components, but I guess it doesn't. And I think a few of the scenes may be missing. I haave 16 available full screen options, but I thought there are 20... I might just d/l the full 64-bit install exe for 530 and run it over my current installation. Hopefully that will sort out a few of these types of issues.

If you really want to delete a card.........

On the details page, next to the "eye" icon is the trash icon.
Then click yes to delete the card. The card remains in your collection & unless the card has been removed from the store, you can download it again. If the card has been removed from the store, please make a backup copy of the card's files as you may not be able to redownload the card again.

Hope that helps.......

How to delete the girl who I do not like?

Click on the card to see it's details.
On the card is an EYE icon.
Click on that EYE Icon to put the card in the Hidden Collection.

Now Click back on the My collection Tab.
This card is no Longer Seen in your Collection.

Haha good luck to you. This has been tried and failed for years. Many missed opportunities and girl after girl fail at this mostly because the toy can't stick to whatever surface they are using. I personally don't like toy clips but I make exceptions for a nicely done bouncing toy ride especially depending on the woman doing it. These numbers are the only ones in the last several years that are good or at least the best attempts..
(remember to put the letter f in front of them when searching I didn't include names..
843, 871, 874, 952, 974, 1141, 1186/87. 1317, and pretty much any Marina Gold show (I included a name after all.)

How to delete the girl who I do not like?

@CasinoGuy wrote:

`i will use other sources for the latest cards....

Can you explain what you mean by "Other Sources" ?

@CasinoGuy - sorry about that but as the records seem to show you have not bought a card for at least the last 5 years......

😉

I don't spend this credits anymore for new cards `i will use other sources for the latest cards.... in my eyes too expensive and I hope it won't destroy your business when more people walk away....

Enjoy your weekend!

Its not realy a offer but a way too make extra money ....

@WA

it has "Selecter Strippers version 1.2.530", with the really telling icon on the list of programs

I think @Jollywoodman was referring to the way iS is shown in the list of installed apps via the control panel.

It is a 2 Step Process

1) create the Shortcut
Change the Name
Add the -fromSilent to the command
Change the Icon
Pin the New shortcut to the TaskBar, Startmenu, or copy it to where you want it.

2) start iStripper, ( it now starts silently to the system Tray. )
Go to Settings
put check in advance settings
scroll down to Safe for Work
Pick one of the Two SFW options.

Now you have a discreet version of iStripper.
Even if someone accidentally
clicks the Shortcut and the App Starts up.
It starts up Silently with a discreet icon in the system tray.

Options:
in the settings

• Have it Always Start Disabled
• Enable the Password.

change the Shortcut
https://wyldanimal.com/videos/iStripper-2-Safe-001.mp4

Use the Password
https://wyldanimal.com/videos/Use-Password-001.mp4

in the Settings of the app is a section Safe For Work.
There you can select Two different discreet options.

They Both change the name and the Icon shown in the Systray

Also, find the shortcut and add the command line option
add -fromSilent

Then change the Icon and the Name of the Shortcut.
Here is a demo...

I found this information.... looks complicated.:

Changing the name of a program listed in the "Installed Apps" list on Windows can be a bit tricky and might require some advanced technical skills. It typically involves modifying system registry entries. However, I must emphasize that modifying the Windows registry can be risky and might lead to system instability or other issues if not done correctly. Therefore, proceed with caution and make sure to create a backup of your registry before making any changes.

Here's a general overview of the steps you would need to follow:

**Warning: Modifying the Windows Registry can have serious consequences if done improperly. It's recommended to proceed only if you are comfortable with advanced Windows system administration.**

1. **Create a Registry Backup:**
Before making any changes, it's crucial to create a backup of your Windows registry. This will allow you to restore your registry in case anything goes wrong. To create a backup, follow these steps:

• Press Win + R to open the Run dialog.
• Type "regedit" and press Enter to open the Registry Editor.
• In the Registry Editor, go to "File" > "Export."
• Choose a location to save the backup file, give it a name, and select "All" under the "Export range" section. Click "Save."

2. **Identify the Program's Registry Entries:**
You need to identify the registry entries associated with the program whose name you want to change. These entries are usually found under `HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall` or `HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Uninstall` for 32-bit applications on 64-bit systems.

3. **Modify the Registry Entry:**
Locate the registry entry corresponding to the program you want to rename. Right-click on the entry and select "Rename." Change the "DisplayName" value to the desired discreet name. Additionally, you might need to modify the "DisplayIcon" and "Publisher" values if you want to hide the program further. Remember that this is a delicate process, and making incorrect changes can cause problems.

4. **Refresh or Restart:**
After making changes, you can refresh the "Installed Apps" list by restarting your computer or by ending the "explorer.exe" process in the Task Manager and then restarting it.

Again, I want to stress the importance of caution when editing the Windows Registry. Making incorrect changes can cause system instability and even make your operating system unusable. If you're not comfortable with these steps, consider seeking assistance from someone with more technical experience.

Furthermore, please note that while this approach can change the displayed name of the program in the "Installed Apps" list, it might not hide the program completely from all system views and actions.

@Jollywoodman
In the settings of the app, you can change the icon displayed in the systray. Have you tried with this option ?

Hey. I have people who at least know a bit about computers around me, and I wanted to remain disceret. When I open the control pannel, it has "Selecter Strippers version 1.2.530", with the really telling icon on the list of programs. I did rename and change the icon, but it doesn't change how it shows up in the control panneol, and on things like the windows ten search bar history. Is there any remedy for this?

For the More Advanced User
If you have Many Previews and want to Automate the Process
you can use a Script to do this
Here is an Example:

copy it and save it to the Root of your Models folder.
Run it from there.

This is in DEMO mode, so as it is written it doesn't delete any files
it just makes a log of What it Would delete when you take it out of DEMO mode.
I leave that part up to you.
Like I said, this is for Advanced Users.

rem find all the Preview Clips and delete them if not part of a full card
@echo off
setlocal enabledelayedexpansion
rem create log if it does not exist
If Not exist RemovePreviewClips.log @echo off > RemovePreviewClips.log
rem Log the start time
Echo Started at %date% - %Time% >> RemovePreviewClips.log
rem search all of the possible card folders
For /D %%d in (a0???, a1????, c0???, d0???, e0???, e1???, e2??? f0???, f1???, f2???) do (
Echo checking in folder %%d
rem if the folder does not have any .vghd files, it is a preview card
@if not Exist %%d\%%d*.vghd (
Echo removing the previews from folder %%d
rem make a log of the clips
echo removing the preview clips from folder %%d >> RemovePreviewClips.log
dir %%d\*.demo >> RemovePreviewClips.log
rem delete the clips
rem
rem in demo mode by default
rem ***************************
rem delete the rem from the line below to allow file deletion
rem del %%d\*.demo
rem ****************************
rem
)
rem loop through all the folders
)
rem done record the time to the log
Echo Finished at %date% - %Time% >> RemovePreviewClips.log
echo Done.
Pause
rem exit

is there a permanent file being downloaded

Yes, the Preview Files are Stored Locally on your PC

If so,where is it being stored

Go to the top right by your user name, and click on the down arrow.
then select Settings
Put a check in the box Advance Settings
Now Scroll Down to the DATA section
Look at the Storage Folder PATH
that is where all of the Models files are stored.

C:\Users\USERNAME\AppData\Local\vghd\models\

use a windows Explorer folder and navigate to that Path.
( this is normally in a Hidden User Folder)
( you might have to google: How to show Hidden Folders )
Each Card has it's own sub-Folder
Both Purchased cards, and Preview cards are ALL in this same folder
make sure you are finding the Preview card number, and not one of your Purchased card numbers.
find the folder name for the Preview of the card and you can delete it.

Each Card has a card number
Each type of card has a Prefix Letter

in General:
iStripper cards start with the Letter 'e'
iStripperXXX cards start with the Letter 'f'

Classic iStripper cards start with the letter 'a'
Classic iStripperXXX cards start with the letter 'c'

VirtuaGirl Classic cards start with the letter 'd'

hope this helps

Will the x return to the top of the cards?

the X has been removed in Versions 1.2.5xx

You can use the Bak arrow to Step Backwards one place in the History.
or you can click the Tab at the top
to go directly back to the My Collection View or Back to the Store View
( using the Tab at the top is the same as using the X was )

Here is a Hint to Navigate from Card to Card Quick and Easy.

open the Playlist Tab
***** multiple cards from the Store to the Playlist

Now you have a LIST of Card Images you can Click on
to quickly get from one card to the Next.

Clear the playlist when done,

Repeat with the Next group of cards.

530 pc here
I clicked on a card, I don't have an X in the top corner to exit the card.
I use the arrow to go back.
Will the x return to the top of the cards?

Does Christal have any more shows scheduled for this year?

@gladiux

Not at this time.......

When I am Downloading Previews, is there a permanent file being downloaded which is taking up disk space on my PC?

If so,where is it being stored; and how can I delete it ?

I'm a fan of the clips where the girl sits on the dildo and rides it. Generally I buy cards if I notice that position in the pictures, but sometimes they don't end up doing it in the clips themselves.

Since the last time someone asked about this was years ago, there should be a TON of new cards that have dildo riding in the XXX clip. What are some recommendations? Thanks.

I create a Playlist from my Collection and use that as the input for the Bonus Downloader.

I open iStripper
select the cards I need to Update and ***** them to the Playlist Tab
save this list as update.vpl

Then in the Bonus Downloader app
I use Menu Selection 4
and Load the update.vpl file.

then Start the Updater
and it downloads the Photosets and Video clips for the cards that I put on the update Playlist.

Does Christal have any more shows scheduled for this year?

530 working fine on both desktop and laptop. Installed correctly on both.

530 is working very well. No problem installing on desktop. I'll check the laptop soon. All functions that I use are working.

You are a Beauty and you will defenitly belong to my faforites.
Kisses und Hugs Christian😘💖

New 😊
https://www.istripper.com/fr/vr180/detail/0e0eb1ef0e04d47f?soft_navigate=ExternDefaultBrowser

@StudioMack

"Can not send request to iStripper server because content of request header is missing"

The script relies on other 3rd party support apps. to build the command to send to the server.
These can often be blocked by your security software,
If that happens, the composed command will not have all the needed parts to send to the iStripper server.
make sure your security software is not blocking these 3rd party apps.

I use the Bonus downloader and the Preview Downloader many times.
It / they work well to keep my collection up to date.
even when I only have 10 cards to update.

There were version of the iStripper app that silently deleted all the previews from cards in my collection.
The Preview downloader worked well, when I need to re-download ALL of my previews again.

@StudioMack - the script you are trying to use was created by a member, @Lukaszr, so the team will not be able to assist you.

In reality though, @Lukaszr developed this capability for people with hundreds or thousands of shows. You only have 61 - it would probably be quicker for you to just download them individually than try and get this resolved. 😊

Endless Shaders03
Another update to the Endless Shaders on Shaders concept..in close up.
Three more shaders were added for active use with @WA 's RandomShaders.exe.
(C)RandomShader05, 06, & 07. One Pole, one Sitting & one either way..

https://scenes.virtuastripper.net/EndlessShaders03.zip

zip size = 7.77 Mb
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
Remixed to Eagles & the most delightful Sandra Lyd

Anyone know what this error means in like.... non coder, real people talk? ;-)


"Can not send request to iStripper server because content of request header is missing"


Was so excited about this script, but no joy so far.

can't even get an acknowledgement that it has even been noted as an issue.

I have to ***** same, unfortunately, for bonus videos - music issues which I and @EverthangForever are reporting:
videos one was said to be fixed - and for us is not; music one is being dismissed by Mods as a wrong volume control management on our side (and it's not).

All good guys ? Let me know ! : )

Still no fix for "Progressive Hotness" not working with NFT's in full screen - that's a pretty BIG issue, can't even get an acknowledgement that it has even been noted as an issue.

Looking good 😍