Hi. Can anyone help me?
The program tells me I can enlarge the girl's size up to 200%, but I can't go beyond 110%. This was possible with the old version of the program.

Hello,

In settings below the Large size slider is a check Box
Don't Size over 100%
You Have that Checked.
Remove the check from that box.

With Don't zoom over 100%
The Max slider where the Model no longer increases in Size, depends on the clip as each clip has slight variance
If you Downloaded in:
720p is about 68 to 69%
https://www.istripper.com/customdata/forum/2026-06-12/DWzgeLwP.png

1080p is about 85 to 87%
https://www.istripper.com/customdata/forum/2026-06-12/GGx89ah6.png

3K is about 110 to 112%
https://www.istripper.com/customdata/forum/2026-06-12/F7k9OEjm.png

4K is about 162 to 165%
https://www.istripper.com/customdata/forum/2026-06-12/0uGT8fbk.png

Hi, thanks for your interest.
I tried downloading in various resolutions, but the model's size doesn't change; only the image quality. Again, with the old version of the program, you could increase the model's "large size" slider to 200%, but now it's only up to 110%. I thought this change was intentional, but the program itself tells me in the Settings - Desktop - Large Size section that I can zoom up to 200%, but that's not possible.

Hi, thanks for your interest.I tried downloading in various resolutions, but the model's size doesn't change; only the image quality. Again, with the old version of the program, you could increase the model's "large size" slider to 200%, but now it's only up to 110%. I thought this change was intentional, but the program itself tells me in the Settings - Desktop - Large Size section that I can zoom up to 200%, but that's not possible.

For me it is possible:
I only have a 14" monitor at the moment, and only download 720 p
Play at 100%. For table clips I can play 135% to see all.
standing clips 100%:
https://postimg.cc/SnC40MLp
standing clip 200%:
https://postimg.cc/grnfFhmz

In your post that refers to the 200% Clio, in fact, under the "full size" item the cursor reaches up to 200 while for me it only reaches 110. This is the problem
https://postimg.cc/DmKdTJVV

In your post that refers to the 200% Clio, in fact, under the "full size" item the cursor reaches up to 200 while for me it only reaches 110. This is the problemhttps://postimg.cc/DmKdTJVV

I also have the same problem

Sorry, but your answer isn't clear to me. How did you manage to get the full-size line to 200? My maximum is 110.
https://postimg.cc/F7g1tzyh

Sorry, but your answer isn't clear to me. How did you manage to get the full-size line to 200? My maximum is 110.https://postimg.cc/F7g1tzyh

As far as I know I always had this.
See als the text in the picture you post:
Full size: ".... here you can increase this size up to 200%"
I don't know why you can not do this.

OK, I saw your Link to your settings
Here is what you Need to do....

Large Size Slider Only goes up to 110%
https://www.istripper.com/customdata/forum/2026-06-13/fso1furB.png


Quit iStripper

Press WIN+R
https://www.istripper.com/customdata/forum/2026-06-13/TloZjrS6.png

Copy and Paste in this command it's one long line...
powershell -NoProfile -Command "reg add 'HKCU\Software\Totem\vghd\ui' /v advancedSettingsEnabled /t REG_DWORD /d 1 /f"
https://www.istripper.com/customdata/forum/2026-06-13/HuQbkRTO.png
press OK

Restart iStripper
https://www.istripper.com/customdata/forum/2026-06-13/b1xxzqjq.png

Thank you all the same

Watch the video:
https://wyldanimal.com/videos/stuck-at-110.mp4

Quit iStripper

Copy this
powershell -NoProfile -Command "reg add 'HKCU\Software\Totem\vghd\ui' /v advancedSettingsEnabled /t REG_DWORD /d 1 /f"

Press the Windows Key and R key at the same time WIN + R
In the RUN popup, Paste in the Command you Copied above
Press OK

Restart iStripper

Slider is Stuck at 110% Why this can Happen?
In version 1.2.xxx When you Visited Settings
there was an Option to display Advance Settings.

Version 1.2.xxx Advanced Settings
https://www.istripper.com/customdata/forum/2026-06-13/fCmKjc2x.png
If iStripper is Started When it is Not Checked, then Large Size is Limited to 110%
https://www.istripper.com/customdata/forum/2026-06-13/Whm56cPj.png

When advanced Settings is Checked,
Large Size is Allowed to 200%
https://www.istripper.com/customdata/forum/2026-06-13/d4egXcn1.png


If you Left Advance Settings NOT checked while on version 1.2.xxx
and Then Updated to 2.x.xxx

You then are stuck with Advance Setting not checked, and the slider only goes to 110%

you need to quit iStripper and Make a registry edit to enable Advance settings.

That's what this command does:
powershell -NoProfile -Command "reg add 'HKCU\Software\Totem\vghd\ui' /v advancedSettingsEnabled /t REG_DWORD /d 1 /f"

Paste that in to the Windows Run Popup.

Thank you so much for your reply. It's ok now.

Hi, I have another problem.
In the model settings, under "display model name" and "names display duration," the changes I make aren't saved.
https://postimg.cc/Js0HJcBT

@metro5
Go to https://www.istripper.com download the latest version and install it without uninstalling the previous one. This bug should be fixed now.

Thank you very much. It works now.

Hi, there are some cards that require a joker card. How do I get one? Thanks.

play events right now the ice breaker game awards joker cards

Thanks for the reply. Is there a cheaper way to buy the Joker card?

nope

One last question: I won a joker card while playing the ice breaker game. Is it possible to exchange it for another?

@metro5

Consider yourself lucky! The whole point of Joker cards is to exhange it to Special Event Cards. You can't purchase them with credits, just with Joker cards.

Just go to Store and see if there are any special event cards that you'd like to have and you can purchase it using your Joker card.

You mean exchange one SEC for another. No, that's not planned.😟

Sorry, I made a mistake... I'm a beginner. I didn't win a Joker card with the game, but a special event card (which I'm not interested in). I wanted to know if it's possible to exchange it for another special event card. Thanks.