There is another problem, in the new version, Ariel A has light around his body (not before), while like Tina it is normal. Excuse me, is there a way to go back to the previous version?

@foris1016 - two things

First, which Ariel A show please has this "halo" effect?

Secondly, do you remember which version you were on before?

@everyone Hi all, please install our new version which was released last week : https://www.istripper.com

還有一個問題，在新版本中，Ariel A 的身體周圍有光（以前沒有），而和 Tina 一樣是正常的。請問，有沒有辦法回到以前的版本？@foris1016 - 兩件事首先，請哪個 Ariel A 節目有這種“光環”效果？其次，你還記得你之前是哪個版本的嗎？

My computer is i3-3770, ***** to upgrade windows 11, the last version of istripper was ok.
Now after the upgrade of istripper, there is light around Ariel A's body, all 6 have it, and Sofie Lilith also has a slight phenomenon.
If it is an older card, but, like Noemi Moon, Paula Shy, LUCY LI, Alexa Tomas...etc, it is normal.

@Dom195
What is slow on your PC ?
I'm running Win11 and iStripper is not slow on my PC.

Are you using 4k Monitors?
I think the Problem is caused by my two 4k Monitors.
As soon as Istripper STarts my whole System turns slow af :(

Im on windows 11, (i7 8th gen, 1080 monitor display) and have a nvme drive, but as i store the cards on a hdd, some of the cards do take quite a few seconds to load..(sometimes i wonder if its going to).. But there is only slowness in loading, not playing. Im wondering if i put a storage ssd in place of the storage hdd would it make any difference.

@Dom195
I'm using a 2560x1440 monitor and I play the shows in 3k according to my screen resolution. So, you're maybe right when you say that the slow running is caused by your 4k screens, they need more power from the hardware than mine.

@everyone Hi all, please install our new version which was released last week : https://www.istripper.com
Open your web browser and go to www.istripper.com. Download it ! : )

About the help of the software : it is not translated in another language than english and it is not up to date with the last versions of the software, all the screen captures are from an older version and don't match with the new GUI.
This guide is very important for the new users, I think, and he has to be updated.
By the way, thank you to the team for the good work 👍

@user5789

Im wondering if i put a storage ssd in place of the storage hdd would it make any difference.

Of course it is, the first Drive is an Samsung SSD 850 EVO which is mounted on /dev/sda
and the second Drive an Western Digital WD30EFRX-68EUZN0 which is mounted on /dev/sdb.
The SSD is connected to an 6 Gbit SATA Cable.

I used hdparm ta make a "quick & dirty" test for you.

user@FF2004:~$ sudo hdparm -tT /dev/sda
[sudo] Passwort für user:

/dev/sda:
Timing cached reads: 41084 MB in 1.99 seconds = 20687.82 MB/sec
Timing buffered disk reads: 1500 MB in 3.00 seconds = 499.92 MB/sec

user@FF2004:~$ sudo hdparm -tT /dev/sdb

/dev/sdb:
Timing cached reads: 41708 MB in 1.99 seconds = 21004.65 MB/sec
Timing buffered disk reads: 426 MB in 3.01 seconds = 141.59 MB/sec
user@FF2004:~$

Here are some useful Links for further Information, hope it helps.

https://en.wikipedia.org/wiki/Hdparm

https://disablehddapm.blogspot.com/

https://www.anandtech.com/bench/SSD21/3005

https://wiki.ubuntuusers.de/Festplatten-Geschwindigkeitstest/

https://www.deepl.com/translator

I updated yesterday and it is really choppy using the CPU setting. I switched to the GPU setting and that runs a lot smoother. I'm on Windows 11 and the update made it worse. How do I roll back to previous version?

@shaggs31 Hi,Can you please send your vghd.log to [email protected] ? Look for it on your computer in your data folder Please also copy/paste this link in your email

https://www.istripper.com/forum/thread/50758/2

Everything about iStripper / NEW VERSION: 1.2.360(PC) / 1.2.361(Mac)

You might have already received our little notification today saying a new version of iStripper is available 😊 Here are some details about it, just in case you need: - the update of your status should...

Thank you

To my computer after the new version install it lamented missing
msvcr120.dll and program didn't start.
I had to find online that .dll and drop it manualy on istripper main folder.
then it launched..
And then again also music doesn't play ... 😢💔

👍

Is there a filter in the software or site that lets you know which xxx cards have model audio or not?

Is there a filter in the software or site that lets you know which xxx cards have model audio or not?
Is there a marker or symbol on individual clips that say if it has model audio?