I`m glad I had all of them. Have a good life Nikky Case.

The amount of money I have saved using this program and at the same time the amount I have invested in this hobby, hell to the yea I would.

You'd buy a new core just for iStripper? That's dedication! ;)

Im wondering if it is a Windows 10 thing or update. Will create a Window 7 install in VM and install VGHD to check this out. I just don't get it. I can pull 10 3K models on the screen at the same time and only the 1208 shows frame drops(Only 30% used and 1.5GB of ram). I'm eyeballing the new Ryzen 9 12 core very hard but I know my system is more than capable.

Hi Alaris

The only solution is more masking i am afraid, nothing wrong with your coding pal.

Hope you dont mind i played around with your images and made a couple of extra masks to cover up the reflection and pick out the detail on the ferrari.

It was a lovely picture to work with and that is one damm sexy ferrari so i did a bonus scene for you using a 3d rather then 2d camera to a a zoom to get a nice close up view with a sideways pan. let me know what you think

so your fixed scene is (ALARSI) Garage (top-pole advanced) - Modified 2.scn and the new one i did is (ALARSI) Garage (top-pole advanced) - Modified.scn

https://www.dropbox.com/sh/42ah26ns1pjhtza/AAD_sqrbFJBg2Asy5HbCss_0a?dl=0

Its fun. It has interactive decision points and clarity in what you can expect.

The Li Moon parody card is FANTASTIC! (HOTS player here)

Thank you.

Are all her videos still functional?

Jana H

@stefnev1

I guess I've always done it wrong then.😂

@Chicsans
Because if someone replaces its system drive (the C on Windows), he must copy the Data folder too.
Or, as me, if the Data folder isn't on the C drive, but on the same one than the Models folder. I did that to preserve the place on my little SSD system and programs drive.

@stefnev1

Why are we always advised to copy the Data folder to the new drive?
When I first moved the models to a different storage location, I used the 'change models storage' tool that is on the settings page. The software moved all the models onto my external storage device, but the 'data' folder stayed on my 'C' drive.

@darn5

I just did a similar thing. I had my models files stored on an external drive. I bought a larger storage disk and simply copied the entire models folder to the new disk. Then I assigned the same drive letter that the old disk had onto the new disk.

I don't know if this will work for you.

@darn5
Quit the software. Plug your new HDD, make the copy of the Data and Models folders with the same path. After the copy, remove your old HDD, restart Windows and verify that the new one has the same letter to retrieve the entire path. You can now relaunch iStripper and enjoy the girls.

Hi,

i bought a new harddrive and i want to replace the old one that currently holds my collection. How can i copy the downloaded shows over to the new drive without ***** the program? Last time i changed the directory i had to redownload all shows, obviously that didn't go so well ...

I have enough bandwith, but it's unnecessary traffic in my mind.

On an AMD system, with an 8 core FX and a Polaris Rx570, a system which is very highly tuned for video playback as opposed to gaming, running driver 19.5.1 on Windows 7, with the 1208 preview at 3k on a 32inch 2560x1440 monitor and operating in desktop mode, I see NO choppiness.

Hi guys, I have escalated this thread,we will get back to you asap. Thank you

no worrys here.👍

Hello Friends: I need your great help

This scene looks very nice, except that the detail I show I could not find the solution and it has me crazy.

In FInalCut or Photoshop it is very easy to do it, but here I do not find how. I read the whole section, but I did not find the solution

The scene is called: (ALARSI) Garage (top-pole advanced) .scn and can be downloaded from here.

https://drive.google.com/file/d/1x3WsDRKT_U3P4SIMuFYUMg3rGnklGEb1/view?usp=sharing

If someone could help me finish the code I would be, very, very grateful.

Didn't feel the want/need to play this time around but I had fun with the last one.

Depuis que j'ai installé la dernière version, seule les cartes en 720p fonctionnent, impossible de jouer les plus récentes, même les 1080. J'ai tenté de réinstaller une seconde fois, sans succès.

klaatu1 your avatar needs to put it away... nobody wants to see those nasty things waving around!

That is odd - for me it stays in the systray.

It's still in the processes but the application is gone! It's not in the tray or on the taskbar! Alt+Space will turn it on or off... but have to quit from a right click in task manager. To get it to show up again I have to 'go to file location' double click the icon... during a game, this is NOT handy... ;)

Thanks a lot! The Advanced settings also provides other useful stuff. :)

@Skyscraper48

On the settings page enable "Advanced Settings" and then set "Free Preview Push" to "Never". Then delete any previews that have already been downloaded.

I'm actually not so bothered with the event itself, what does somewhat bother me is the choice of model for the cosplay. Me being an avid overwatch player (and gamer in general), and just getting back from comicon.. I am somewhat displeased that Li Moon was the model chosen to be cosplaying as D.va

That's just my personal preference, I am the kind of person who likes cosplays to be on the more accurate side (in this case, it's mostly the breast size). I probably will still be getting the card though :P

It's extremely annoying that the software keeps downloading and playing random cards, how can I disable that? I only want it to play the cards I have purchased.

I can also confirm that Leyla Fiore's new card is not running smooth on my system at any quality. Choppy/low frame rate and not enjoyable to watch. I have a very capable system and don't have this issue with any other card.

i7-6800k 3.4ghz
16GB RAM
1 TB 970 Evo Samsung NVME
GTX 1080ti

i no have access of this new version-
but i have roll on the figures of some model, and put me eqully in old version-

From @shodan084 's reply it seems to me that the minimisation to systray works but that ALT-SPACE or some other key combination is opening it up again. According to the help on the settings page ALT-SPACE should deactive the program but there is no hint that it actually toggles between minimised and not-minimised.

That's strange, because I have Windows 7 as well and latest version of iStripper (1.2.228). Clicking on the X button hides iStripper in the system tray. I don't know why it isn't on your side.

I would prefer it if random key presses would not start iStripper if it is minimized or in the tray, there is usually a good reason I've put it there! Keyboard activation is currently set to [ALT + Space] (default) yet key presses in Conan Exiles is setting it as active. Every once in a while, the pointer will appear in the game. Everything will lag.

Most annoying during heavy combat moments!
Death by snu snu... :)

Yes. I want to minimise to the tray to check if the program is activated while playing games, but the program is just quitting...

@shodan084

The X icon is close the GUI's window, not minimise to task bar, which is the single horizontal bar icon a little to its left. However neither of these quit the program which is, quite properly, left running in the background (to play clips etc.). If you want to actually quit then use the quit menu option on the systray icon.

X is not minimising to the tray... it's just quitting the program.

Win 7 here.

Clicking the [ X ] button in top right corner minimizes iStripper to the system tray. This is how it should be. If you want to minimize it to taskbar, use the [ _ ] button.

I can't minimize the program to the taskbar using the 'X' in the corner, the program just quits. I thought this was fixed already!

There is a serious problem with the program running in the background, any button press in some games will activate the program no matter how it is running; (minimized to taskbar or screen[size]) this can pull resources from what is being done or accidentally start the program discreetly at inopportune moments! Please check.

@gkar45 , Hooray for us.

The new version of Preview Downloader is available to download:

Preview Downloader (v1.1):
www.isworkshop.eu/index.php?p=preview_downloader

What's new in this version:

• Update: added the option to manually enter the target path to the "models" directory in case the default paths can not be found.
• Update: the user's manual has been updated.
• Fix: the message about paused download, while the "Delay between downloads" option was enabled, was displayed incorrectly. Fixed.
• Fix: the way of declaring variables and parameters in the script has been improved.

Want to say thanks to developers of this game, i get fun, get cards with good discount.

Well done with the crystal clear quality. Damn this software have gone far since i joined back in 2012 😲 Congrats to the Totem team on the amazing work! 👍

"Make a Wish" is making a play for my favorite card of all time and I've only seen about half the clips, so far😍

I played thinking I'd get a card from wishlist if landed on a card space. Didn't realize that the 30+ day rule counted to the game. DON'T PLAY unless your store has numberous cards over 45 days ago.

No cookie for you. Still laggy after update.

@Yuufa

If the power outage occurred while writing to the .ini file, then the file was incomplete and hence the error message. After restarting, the script should overwrite old ini file and create a new one.

A situation similar to those you can find in video games. Often in "triple A" video games you can see information like "Do not turn off the power when this icon is displayed". The game saves player's progress, and when the player turns off the power during writing to file, his savegame will be damaged. The same applies to any other software. If you turn off the power when writing to a file, the file will be incomplete and in most cases it will be useless.

I'm not sure what could have gone wrong in your case. I'm not sure why the script got stuck in place. Next time in case of similar error, try the following:

• close the script,
• open the script installation directory,
• delete the session.ini file,
• delete the cards.txt file,
• run the script again.

PS. New version will be available soon. The bug mentioned by @Chicsans and @Dfner was removed. You will be able to manually enter the path if the default paths are not available. I will do some tests and let you know when the new version will be online.

Problème de lecture du vidéo carte e1208 à partir du programme, suite à la mise à jour de cette carte.

Problem playing the video card e1208 from the program, following the update of this card.

J'ai du stuttering sur la carte e1208 card, même avec la mise à jour de la carte.

De plus l'image du vidéo reste noire, lorsque je le lis à partir du programme.


I have stuttering on the card e1208 card, even with the update of the card.

In addition the image of the video remains black, when I read it from the program.

Probably new clips have higher frame rate than older ones and our systems drop some frames. If that's the case, I think reverting to old 30fps (which are more than sufficient) could be a good solution for Totem.
The video crispness and detail, instead, is showing really an huge emprovement, even played at 720p.

@Chicky, @gkar45

You are making me blush😎

Anyway there is no need to divide me up - I'm so fat that there is more than enough of me to go around.😄

I can't stand this new "quality" standard. I can't see any improvements, but I see the high performance demand. I have a powerful Gaming PC and this show will not run smoothly. It's not choppy, but the frame rate is much lower than in the other clips. I really recommend to let the customer choose the quality level ...